This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Alkalinity, Caco3 Stability results
MS0010015 , Adams Co W/A #4-Kaiser Lake
3 samples have been analysed for Alkalinity, Caco3 Stability at Adams Co W/A #4-Kaiser Lake.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every Alkalinity, Caco3 Stability result
All 3 samples analysed for this analyte are listed below, newest first. No date range is applied.
3 Alkalinity, Caco3 Stability results from the 3 samples listed here: 3 detected, 0 not detected. Those samples also carried 48 results for other analytes, which are on the full results page.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jul 17, 2008, sampling point TF080 | Alkalinity, Caco3 Stability 1067 EPA method 2320B | Not recorded |
|
||
| 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jul 17, 2008, sampling point WL007 | Alkalinity, Caco3 Stability 1067 EPA method 2320B | Not recorded |
|
||
| 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jul 17, 2008, sampling point WL006 | Alkalinity, Caco3 Stability 1067 EPA method 2320B | Not recorded |
-
- Collected
- Jul 17, 2008
- Sampling point
- TF080 Treatment Plant T080
- Sample type
- Routine
- Lab sample
- 080718-004PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Alkalinity, Caco3 Stability 1067 EPA method 2320B
- Result
- 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jul 17, 2008
- Sampling point
- WL007
- Sample type
- Routine
- Lab sample
- 080718-003PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Alkalinity, Caco3 Stability 1067 EPA method 2320B
- Result
- 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jul 17, 2008
- Sampling point
- WL006 Well W006
- Sample type
- Routine
- Lab sample
- 080718-002PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Alkalinity, Caco3 Stability 1067 EPA method 2320B
- Result
- 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
Routine (3).