Alpha
This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
TTHM results
MS0140012 , Moore Bayou Water Association
117 samples have been analysed for TTHM at Moore Bayou Water Association.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every TTHM result
The table below lists 101–110 of 117 samples, newest first — collected May 15, 2006 to August 25, 2008.
10 TTHM results from the 10 samples listed here: 10 detected, 0 not detected. Those samples also carried 40 results for other analytes, which are on the full results page.
Units in this table
TTHM is recorded on this page in ug/l and mg/l. 1 mg/l = 1,000 ug/l.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 25, 2008, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jul 1, 2008 – Sep 30, 2008 |
|
||
| 93.5 ug/l , sample collected Apr 28, 2008, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Apr 1, 2008 – Jun 30, 2008 |
|
||
| 77.27 ug/l , sample collected Jan 29, 2008, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jan 1, 2008 – Mar 31, 2008 |
|
||
| 37.01 ug/l , sample collected Dec 3, 2007, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Oct 1, 2007 – Dec 31, 2007 |
|
||
| 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jul 19, 2007, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jul 1, 2007 – Sep 30, 2007 |
|
||
| 39.97 ug/l , sample collected Apr 24, 2007, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Apr 1, 2007 – Jun 30, 2007 |
|
||
| 89.61 ug/l , sample collected Feb 15, 2007, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jan 1, 2007 – Mar 31, 2007 |
|
||
| 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 27, 2006, sampling point MRT000 | TTHM 2950 EPA method 551.1 | Oct 1, 2006 – Dec 31, 2006 |
|
||
| 100.18 ug/l , sample collected Aug 8, 2006, sampling point MRT000 | TTHM 2950 EPA method 551.1 | Jul 1, 2006 – Sep 30, 2006 |
|
||
| 79.46 ug/l , sample collected May 15, 2006, sampling point MRT000 | TTHM 2950 EPA method 551.1 | Apr 1, 2006 – Jun 30, 2006 |
-
- Collected
- Aug 25, 2008
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 080826-036TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jul 1, 2008 – Sep 30, 2008
-
TTHM 2950 EPA method 524.2
- Result
- 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Apr 28, 2008
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 080429-011TH
- Laboratory
- MSDH Lab
- Monitoring period
- Apr 1, 2008 – Jun 30, 2008
-
TTHM 2950 EPA method 524.2
- Result
- 93.5 ug/l
-
- Collected
- Jan 29, 2008
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 080130-003TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2008 – Mar 31, 2008
-
TTHM 2950 EPA method 524.2
- Result
- 77.27 ug/l
-
- Collected
- Dec 3, 2007
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 071204-004TH
- Laboratory
- MSDH Lab
- Monitoring period
- Oct 1, 2007 – Dec 31, 2007
-
TTHM 2950 EPA method 524.2
- Result
- 37.01 ug/l
-
- Collected
- Jul 19, 2007
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 070720-002TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jul 1, 2007 – Sep 30, 2007
-
TTHM 2950 EPA method 524.2
- Result
- 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Apr 24, 2007
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 070425-005TH
- Laboratory
- MSDH Lab
- Monitoring period
- Apr 1, 2007 – Jun 30, 2007
-
TTHM 2950 EPA method 524.2
- Result
- 39.97 ug/l
-
- Collected
- Feb 15, 2007
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 070216-001TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2007 – Mar 31, 2007
-
TTHM 2950 EPA method 524.2
- Result
- 89.61 ug/l
-
- Collected
- Nov 27, 2006
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 061128-010TH
- Laboratory
- MSDH Lab
- Monitoring period
- Oct 1, 2006 – Dec 31, 2006
-
TTHM 2950 EPA method 551.1
- Result
- 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Aug 8, 2006
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 060809-002TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jul 1, 2006 – Sep 30, 2006
-
TTHM 2950 EPA method 551.1
- Result
- 100.18 ug/l
-
- Collected
- May 15, 2006
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 060516-001TH
- Laboratory
- MSDH Lab
- Monitoring period
- Apr 1, 2006 – Jun 30, 2006
-
TTHM 2950 EPA method 551.1
- Result
- 79.46 ug/l
Routine (10).