Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Antimony, Total results

MS0150018 , Copiah County Industrial Park

12 samples have been analysed for Antimony, Total at Copiah County Industrial Park.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Antimony, Total result

The table below lists 11–12 of 12 samples, newest first — collected April 23, 2002 to September 8, 2003.

2 Antimony, Total results from the 2 samples listed here: 0 detected, 2 not detected. Those samples also carried 22 results for other analytes, which are on the full results page.

Antimony, Total results for Copiah County Industrial Park, from 11 to 12 of 12 samples shown analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Sep 8, 2003
Sampling point
TF080 Treatment Plant T080
Sample type
Routine
Lab sample
030909-036IN
Laboratory
MSDH Lab
Not detected below 0.001 mg/l Minimum Reporting Level , sample collected Sep 8, 2003, sampling point TF080 Antimony, Total 1074 EPA method 200.8 Not recorded
Collected
Apr 23, 2002
Sampling point
TF080 Treatment Plant T080
Sample type
Routine
Lab sample
020424-010IN
Laboratory
MSDH Lab
Not detected below 0.001 mg/l Minimum Reporting Level , sample collected Apr 23, 2002, sampling point TF080 Antimony, Total 1074 EPA method 200.8 Not recorded

Routine (2).