Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

PH, Field Result results

MS0190003 , Town of Meadville

2 samples have been analysed for PH, Field Result at Town of Meadville.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every PH, Field Result result

All 2 samples analysed for this analyte are listed below, newest first. No date range is applied.

2 PH, Field Result results from the 2 samples listed here: 2 detected, 0 not detected. Those samples also carried 31 results for other analytes, which are on the full results page.

PH, Field Result results for Town of Meadville, from the 2 samples analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Apr 4, 2017 10:58
Sampling point
WL003 Well W003
Sample type
Routine
Lab sample
170406-002PC
Laboratory
MSDH Lab
7.6 ph The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Apr 4, 2017 10:58, sampling point WL003 PH, Field Result PHFD EPA method 3500AL-D Not recorded
Collected
Apr 4, 2017 10:50
Sampling point
WL002 Well W002
Sample type
Routine
Lab sample
170406-001PC
Laboratory
MSDH Lab
7.6 ph The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Apr 4, 2017 10:50, sampling point WL002 PH, Field Result PHFD EPA method 3500AL-D Not recorded

Routine (2).