This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Sodium results
MS0190019 , Camp Ridge Point-Side 3 Sandhill
2 samples have been analysed for Sodium at Camp Ridge Point-Side 3 Sandhill.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every Sodium result
All 2 samples analysed for this analyte are listed below, newest first. No date range is applied.
2 Sodium results from the 2 samples listed here: 2 detected, 0 not detected. Those samples also carried 16 results for other analytes, which are on the full results page.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| 2.11 mg/l , sample collected Feb 9, 2021 10:30, sampling point WL001 | Sodium 1052 EPA method 200.7 | Not recorded |
|
||
| 2.5713 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 17, 2017 12:30, sampling point WL001 | Sodium 1052 EPA method 200.8 | Not recorded |
-
- Collected
- Feb 9, 2021 10:30
- Sampling point
- WL001 Well WL001
- Sample type
- Routine
- Lab sample
- NA-210210-060
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sodium 1052 EPA method 200.7
- Result
- 2.11 mg/l
-
- Collected
- Mar 17, 2017 12:30
- Sampling point
- WL001 Well WL001
- Sample type
- Routine
- Lab sample
- 170320-001PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sodium 1052 EPA method 200.8
- Result
- 2.5713 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
Routine (2).