Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Antimony, Total results

MS0210001 , Beat III W/A #1-Sand Hill

1 sample has been analysed for Antimony, Total at Beat III W/A #1-Sand Hill.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

Showing samples collected between September 25, 2024 and September 25, 2026. That is this page’s default, not a limit on what the agency records.

Show every sample on record

Choose a date range

Every Antimony, Total result

The 1 sample analysed for this analyte collected between September 25, 2024 and September 25, 2026 is listed below, newest first.

1 Antimony, Total result from the 1 sample listed here: 0 detected, 1 not detected. Those samples also carried 10 results for other analytes, which are on the full results page.

Antimony, Total results for Beat III W/A #1-Sand Hill, from the 1 samples analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Feb 5, 2025 12:15
Sampling point
TF080 Treatment Plant T080
Sample type
Routine
Lab sample
IN-250206-043
Laboratory
MSDH Lab
Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 5, 2025 12:15, sampling point TF080 Antimony, Total 1074 EPA method 200.8 Jan 1, 2023 – Dec 31, 2025

Routine (1).