Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Styrene results

MS0210001 , Beat III W/A #1-Sand Hill

42 samples have been analysed for Styrene at Beat III W/A #1-Sand Hill.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Styrene result

The table below lists 41–42 of 42 samples, newest first — collected January 20, 2004 to January 20, 2004.

2 Styrene results from the 2 samples listed here: 0 detected, 2 not detected. Those samples also carried 40 results for other analytes, which are on the full results page.

Styrene results for Beat III W/A #1-Sand Hill, from 41 to 42 of 42 samples shown analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Jan 20, 2004
Sampling point
TF105 Treatment Plant T105
Sample type
Routine
Lab sample
040121-037VO
Laboratory
MSDH Lab
Not detected below 0.0005 mg/l Method Detection Limit , sample collected Jan 20, 2004, sampling point TF105 Styrene 2996 Jan 1, 2004 – Mar 31, 2004
Collected
Jan 20, 2004
Sampling point
TF080 Treatment Plant T080
Sample type
Routine
Lab sample
040121-015VO
Laboratory
MSDH Lab
Not detected below 0.0005 mg/l Method Detection Limit , sample collected Jan 20, 2004, sampling point TF080 Styrene 2996 Jan 1, 2004 – Mar 31, 2004

Routine (2).