This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Radium-226 results
MS0220007 , Grenada Co W/S-Mondy Rd/Elliot
26 samples have been analysed for Radium-226 at Grenada Co W/S-Mondy Rd/Elliot.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every Radium-226 result
The table below lists 11–20 of 26 samples, newest first — collected March 4, 2010 to May 15, 2012.
10 Radium-226 results from the 10 samples listed here: 6 detected, 4 not detected. Those samples also carried 45 results for other analytes, which are on the full results page.
Units in this table
Radium-226 is recorded on this page in mg/l and pci/l.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| Not detected below 0.141 pci/l Minimum Reporting Level , sample collected May 15, 2012 12:28, sampling point TF103 | Radium-226 4020 EPA method 903.1 | Apr 1, 2012 – Jun 30, 2012 |
|
||
| Not detected below 0.135 pci/l Minimum Reporting Level , sample collected May 15, 2012 12:44, sampling point TF104 | Radium-226 4020 EPA method 903.1 | Apr 1, 2012 – Jun 30, 2012 |
|
||
| 0.3 pci/l , sample collected Mar 6, 2012 14:08, sampling point TF105 | Radium-226 4020 EPA method 903.1 | Jan 1, 2012 – Mar 31, 2012 |
|
||
| Not detected below 0.141 pci/l Minimum Reporting Level , sample collected Mar 6, 2012 13:41, sampling point TF103 | Radium-226 4020 EPA method 903.1 | Jan 1, 2012 – Mar 31, 2012 |
|
||
| Not detected below 0.135 pci/l Minimum Reporting Level , sample collected Mar 6, 2012 13:52, sampling point TF104 | Radium-226 4020 EPA method 903.1 | Jan 1, 2012 – Mar 31, 2012 |
|
||
| 0.101 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 4, 2010, sampling point TF104 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 0.181 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 4, 2010, sampling point TF103 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 0.217 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 4, 2010, sampling point TF102 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 0.037 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 4, 2010, sampling point TF080 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 0.013 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 4, 2010, sampling point TF105 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
-
- Collected
- May 15, 2012 12:28
- Sampling point
- TF103 Treatment Plant T103
- Sample type
- Routine
- Lab sample
- 120516-124
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Apr 1, 2012 – Jun 30, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- Not detected below 0.141 pci/l Minimum Reporting Level
-
- Collected
- May 15, 2012 12:44
- Sampling point
- TF104 Treatment Plant T104
- Sample type
- Routine
- Lab sample
- 120516-125
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Apr 1, 2012 – Jun 30, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- Not detected below 0.135 pci/l Minimum Reporting Level
-
- Collected
- Mar 6, 2012 14:08
- Sampling point
- TF105 Treatment Plant T105
- Sample type
- Routine
- Lab sample
- 120307-008
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Jan 1, 2012 – Mar 31, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- 0.3 pci/l
-
- Collected
- Mar 6, 2012 13:41
- Sampling point
- TF103 Treatment Plant T103
- Sample type
- Routine
- Lab sample
- 120307-006
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Jan 1, 2012 – Mar 31, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- Not detected below 0.141 pci/l Minimum Reporting Level
-
- Collected
- Mar 6, 2012 13:52
- Sampling point
- TF104 Treatment Plant T104
- Sample type
- Routine
- Lab sample
- 120307-007
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Jan 1, 2012 – Mar 31, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- Not detected below 0.135 pci/l Minimum Reporting Level
-
- Collected
- Mar 4, 2010
- Sampling point
- TF104 Treatment Plant T104
- Sample type
- Routine
- Lab sample
- 00343-004
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.101 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Mar 4, 2010
- Sampling point
- TF103 Treatment Plant T103
- Sample type
- Routine
- Lab sample
- 00343-003
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.181 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Mar 4, 2010
- Sampling point
- TF102 Treatment Plant T102
- Sample type
- Routine
- Lab sample
- 00343-002
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.217 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Mar 4, 2010
- Sampling point
- TF080 Treatment Plant T080
- Sample type
- Routine
- Lab sample
- 00343-001
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.037 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Mar 4, 2010
- Sampling point
- TF105 Treatment Plant T105
- Sample type
- Routine
- Lab sample
- 00343-005
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.013 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
Routine (10).