Iron results

MS0230050 , Kiln Utility and Fire District of Hancoc

1 sample has been analysed for Iron at Kiln Utility and Fire District of Hancoc.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Iron result

All 1 samples analysed for this analyte are listed below, newest first. No date range is applied.

1 Iron result from the 1 sample listed here: 0 detected, 1 not detected. Those samples also carried 19 results for other analytes, which are on the full results page.

Iron results for Kiln Utility and Fire District of Hancoc, from the 1 samples analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result	Analyte	Monitoring period
Collected Dec 3, 2008 Sampling point WL004 Well W004 Sample type Routine Lab sample 081204-006PC Laboratory MSDH Lab
Not detected below 0.1 mg/l Minimum Reporting Level , sample collected Dec 3, 2008, sampling point WL004	Iron 1028 EPA method 200.8	Not recorded

Collected
Dec 3, 2008

Sampling point
WL004 Well W004

Sample type
Routine

Lab sample
081204-006PC

Laboratory
MSDH Lab

Monitoring period
Not recorded
- Iron 1028 EPA method 200.8
  
  Result
  Not detected below 0.1 mg/l Minimum Reporting Level

Routine (1).