Lead and copper

MS0230065 , Hancock County Water & Sewer

Every monitoring period on record is listed here. This page applies no date range. The same list limited to the last two years.

Lead and copper 90th-percentile sample summaries for Hancock County Water & Sewer, 50 summaries, every one on record. The agency records no date of receipt for any of them.
Analyte	Monitoring period	Samples	90th percentile	Facility	Data quality
Copper	Jan 1, 2023 – Dec 31, 2025	10	0.415 mg/l	DS000	Accepted
Lead	Jan 1, 2023 – Dec 31, 2025	10	0.0063 mg/l	DS000	Accepted
Copper	Jan 1, 2020 – Dec 31, 2022	10	0.01 mg/l	DS000	Accepted
Lead	Jan 1, 2020 – Dec 31, 2022	10	0 mg/l	DS000	Accepted
Copper	Jan 1, 2019 – Dec 31, 2019	20	0.2124 mg/l	DS000	Accepted
Lead	Jan 1, 2019 – Dec 31, 2019	20	0.0022 mg/l	DS000	Accepted
Copper	Jan 1, 2018 – Dec 31, 2018	20	0.5798 mg/l	DS000	Accepted
Lead	Jan 1, 2018 – Dec 31, 2018	20	0.0059 mg/l	DS000	Accepted
Copper	Jan 1, 2017 – Dec 31, 2017	20	0.3568 mg/l	DS000	Accepted
Lead	Jan 1, 2017 – Dec 31, 2017	20	0.0108 mg/l	DS000	Accepted
Copper	Jul 1, 2016 – Dec 31, 2016	20	0.6356 mg/l	DS000	Accepted
Lead	Jul 1, 2016 – Dec 31, 2016	20	0.0023 mg/l	DS000	Accepted
Copper	Jan 1, 2016 – Jun 30, 2016	20	0.5394 mg/l	DS000	Accepted
Lead	Jan 1, 2016 – Jun 30, 2016	20	0.0043 mg/l	DS000	Accepted
Copper	Jan 1, 2015 – Dec 31, 2015	10	0.7808 mg/l	DS000	Accepted
Lead	Jan 1, 2015 – Dec 31, 2015	10	0.0199 mg/l	DS000	Accepted
Copper	Jan 1, 2014 – Dec 31, 2014	10	0.2154 mg/l	DS000	Accepted
Lead	Jan 1, 2014 – Dec 31, 2014	10	0.0028 mg/l	DS000	Accepted
Copper	Jan 1, 2013 – Dec 31, 2013	10	0.1498 mg/l	DS000	Accepted
Lead	Jan 1, 2013 – Dec 31, 2013	10	0.0073 mg/l	DS000	Accepted
Copper	Jul 1, 2012 – Dec 31, 2012	21	0.3875 mg/l	DS000	Accepted
Lead	Jul 1, 2012 – Dec 31, 2012	21	0.0058 mg/l	DS000	Accepted
Copper	Jan 1, 2012 – Jun 30, 2012	20	0.156 mg/l	DS000	Accepted
Lead	Jan 1, 2012 – Jun 30, 2012	20	0.0047 mg/l	DS000	Accepted
Copper	Jul 1, 2011 – Dec 31, 2011	21	0.4254 mg/l	DS000	Accepted
Lead	Jul 1, 2011 – Dec 31, 2011	21	0.0105 mg/l	DS000	Accepted
Copper	Jan 1, 2011 – Jun 30, 2011	20	0.8689 mg/l	DS000	Accepted
Lead	Jan 1, 2011 – Jun 30, 2011	20	0.0177 mg/l	DS000	Accepted
Copper	Jul 1, 2010 – Dec 31, 2010	21	0.4518 mg/l	DS000	Accepted
Lead	Jul 1, 2010 – Dec 31, 2010	21	0.0116 mg/l	DS000	Accepted
Copper	Jan 1, 2010 – Jun 30, 2010	20	3.6471 mg/l	DS000	Accepted
Lead	Jan 1, 2010 – Jun 30, 2010	20	0.0432 mg/l	DS000	Accepted
Copper	Jul 1, 2009 – Dec 31, 2009	20	0.3208 mg/l	DS000	Accepted
Lead	Jul 1, 2009 – Dec 31, 2009	20	0.0124 mg/l	DS000	Accepted
Copper	Jan 1, 2009 – Jun 30, 2009	20	0.4039 mg/l	DS000	Accepted
Lead	Jan 1, 2009 – Jun 30, 2009	20	0.0142 mg/l	DS000	Accepted
Copper	Jul 1, 2008 – Dec 31, 2008	20	0.3917 mg/l	DS000	Accepted
Lead	Jul 1, 2008 – Dec 31, 2008	20	0.0499 mg/l	DS000	Accepted
Copper	Jan 1, 2008 – Jun 30, 2008	20	0.744 mg/l	DS000	Accepted
Lead	Jan 1, 2008 – Jun 30, 2008	20	0.044 mg/l	DS000	Accepted
Copper	Jan 1, 2007 – Dec 31, 2007	10	0.108 mg/l	DS000	Accepted
Lead	Jan 1, 2007 – Dec 31, 2007	10	0.1139 mg/l	DS000	Accepted
Copper	Jan 1, 2006 – Dec 31, 2006	11	0.0561 mg/l	DS000	Accepted
Lead	Jan 1, 2006 – Dec 31, 2006	11	0.0237 mg/l	DS000	Accepted
Copper	Jan 1, 2005 – Jun 30, 2005	20	0.2106 mg/l	DS000	Accepted
Lead	Jan 1, 2005 – Jun 30, 2005	20	0.0108 mg/l	DS000	Accepted
Copper	Jul 1, 2004 – Dec 31, 2004	21	0.1491 mg/l	DS000	Accepted
Lead	Jul 1, 2004 – Dec 31, 2004	21	0.0172 mg/l	DS000	Accepted
Copper	Jul 1, 2003 – Dec 31, 2003	6	0.13 mg/l	DS000	Accepted
Lead	Jul 1, 2003 – Dec 31, 2003	6	0.003 mg/l	DS000	Accepted

No date of receipt is recorded for any of these summaries.

This system’s violations

What the 90th percentile is

The 90th percentile of all samples collected from the distribution system is the standard that the US Environmental Protection Agency has chosen for determining compliance with the Lead and Copper Action Level under the federal Lead and Copper Rule. The 90th percentile is determined by ranking all sample results from lowest to highest and finding a result that is 90% of the number of sample results from the top. For example, if there are 10 sample results, the 90th percentile would be the 9th sample result from the top.

From the help text published with these pages.