This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Alkalinity, Caco3 Stability results
MS0240001 , City of Biloxi
3 samples have been analysed for Alkalinity, Caco3 Stability at City of Biloxi.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every Alkalinity, Caco3 Stability result
All 3 samples analysed for this analyte are listed below, newest first. No date range is applied.
3 Alkalinity, Caco3 Stability results from the 3 samples listed here: 3 detected, 0 not detected. Those samples also carried 48 results for other analytes, which are on the full results page.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| 5.98 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Oct 18, 2012, sampling point WL012 | Alkalinity, Caco3 Stability 1067 EPA method 2320B | Not recorded |
|
||
| 8.23 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jan 22, 2010, sampling point WL018 | Alkalinity, Caco3 Stability 1067 EPA method 2320B | Not recorded |
|
||
| 196 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jan 22, 2010, sampling point WL006 | Alkalinity, Caco3 Stability 1067 EPA method 2320B | Not recorded |
-
- Collected
- Oct 18, 2012
- Sampling point
- WL012 Well W012
- Sample type
- Routine
- Lab sample
- 121023-010PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Alkalinity, Caco3 Stability 1067 EPA method 2320B
- Result
- 5.98 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jan 22, 2010
- Sampling point
- WL018
- Sample type
- Routine
- Lab sample
- 100126-016PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Alkalinity, Caco3 Stability 1067 EPA method 2320B
- Result
- 8.23 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jan 22, 2010
- Sampling point
- WL006 Well W006
- Sample type
- Routine
- Lab sample
- 100126-015PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Alkalinity, Caco3 Stability 1067 EPA method 2320B
- Result
- 196 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
Routine (3).