This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Distribution DS001
Inactive- Facility
- DS001 HCUA-Traditions
- Type
- Other (OT)
- Status
- Inactive (I) Activity date June 4, 2013
- Reason
- DS001 SHOULD HAVE BEEN DS000-SDWIS WOULD NOT LET ME CHANGE OR DELETE.
Where this facility is sampled
No active sampling points are on record for this facility.
This page shows active sampling points only and leaves out retired ones and the samples taken at them.
Analyte levels designated for this facility
Every level on record is listed, including levels that have been replaced. A row with a date under Effective to has been superseded; one reading Open has not.
Summarized field sample results for this facility — each monitoring period, and the level it was assessed against.
| Analyte | Control level type | Level | Effective from | Effective to | Summary type |
|---|---|---|---|---|---|
|
Chlorine
0999 |
Maximum | 4.0 MG/L | May 1, 2011 | May 20, 2011 |
Chlorine/ |
What a designated level is
Under the Lead and Copper Rule, primacy agencies periodically designate a minimum, maximum, or range of values for a given analyte and treatment plant or entry point to the distribution system. These are called either Water Quality Control Parameters (WQCP) or Maximum Permissible Limits, depending on why and what level was set.
From the help text published with these pages.