This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
TTHM results
MS0250014 , Mt Olive Water Association
22 samples have been analysed for TTHM at Mt Olive Water Association.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every TTHM result
The table below lists 11–20 of 22 samples, newest first — collected September 23, 2008 to February 28, 2024.
10 TTHM results from the 10 samples listed here: 10 detected, 0 not detected. Those samples also carried 40 results for other analytes, which are on the full results page.
Units in this table
TTHM is recorded on this page in ug/l and mg/l. 1 mg/l = 1,000 ug/l.
We withheld the location of 2 sampling points below. The location on record identifies a private home, and we do not publish those. That is our decision, not the agency’s. The sampling point, its type and every result taken there are published unchanged.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| 22.1 ug/l , sample collected Feb 28, 2024 11:40, sampling point SM2 | TTHM 2950 EPA method 524.2 | Jan 1, 2024 – Mar 31, 2024 |
|
||
| 21.4 ug/l , sample collected Feb 28, 2024 11:02, sampling point SM1 | TTHM 2950 EPA method 524.2 | Jan 1, 2024 – Mar 31, 2024 |
|
||
| 9.13 ug/l , sample collected May 18, 2023 09:00, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Not recorded |
|
||
| 1.29 ug/l , sample collected Mar 16, 2022 08:40, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Not recorded |
|
||
| 27.9 ug/l , sample collected Sep 1, 2021 11:15, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jan 1, 2021 – Dec 31, 2021 |
|
||
| 28.3 ug/l , sample collected Jul 25, 2019 08:30, sampling point MRT000 | TTHM 2950 | Jan 1, 2019 – Dec 31, 2019 |
|
||
| 53.4 ug/l , sample collected Aug 2, 2018 07:00, sampling point MRT000 | TTHM 2950 | Jan 1, 2017 – Dec 31, 2019 |
|
||
| 15 ug/l , sample collected Sep 24, 2014 05:05, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jan 1, 2014 – Dec 31, 2016 |
|
||
| 8.85 ug/l , sample collected Jul 26, 2013 10:40, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jan 1, 2011 – Dec 31, 2013 |
|
||
| 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Sep 23, 2008, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jan 1, 2008 – Dec 31, 2010 |
-
- Collected
- Feb 28, 2024 11:40
- Sampling point
- SM2 Location withheld
- Sample type
- Routine
- Lab sample
- 810-95680-2
- Laboratory
- Eurofins Eaton Analytical South Bend in
- Monitoring period
- Jan 1, 2024 – Mar 31, 2024
-
TTHM 2950 EPA method 524.2
- Result
- 22.1 ug/l
-
- Collected
- Feb 28, 2024 11:02
- Sampling point
- SM1 Location withheld
- Sample type
- Routine
- Lab sample
- 810-95680-1
- Laboratory
- Eurofins Eaton Analytical South Bend in
- Monitoring period
- Jan 1, 2024 – Mar 31, 2024
-
TTHM 2950 EPA method 524.2
- Result
- 21.4 ug/l
-
- Collected
- May 18, 2023 09:00
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- TH-230519-004
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
TTHM 2950 EPA method 524.2
- Result
- 9.13 ug/l
-
- Collected
- Mar 16, 2022 08:40
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- TH-220317-016
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
TTHM 2950 EPA method 524.2
- Result
- 1.29 ug/l
-
- Collected
- Sep 1, 2021 11:15
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- TH-210902-026
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2021 – Dec 31, 2021
-
TTHM 2950 EPA method 524.2
- Result
- 27.9 ug/l
-
- Collected
- Jul 25, 2019 08:30
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 190726-006TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2019 – Dec 31, 2019
-
TTHM 2950
- Result
- 28.3 ug/l
-
- Collected
- Aug 2, 2018 07:00
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 180803-005TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2017 – Dec 31, 2019
-
TTHM 2950
- Result
- 53.4 ug/l
-
- Collected
- Sep 24, 2014 05:05
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 140926-001TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2014 – Dec 31, 2016
-
TTHM 2950 EPA method 524.2
- Result
- 15 ug/l
-
- Collected
- Jul 26, 2013 10:40
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 130726-017TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2011 – Dec 31, 2013
-
TTHM 2950 EPA method 524.2
- Result
- 8.85 ug/l
-
- Collected
- Sep 23, 2008
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 080924-007TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
TTHM 2950 EPA method 524.2
- Result
- 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
Routine (10).