This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Sulfate results
MS0250022 , South Central Water Assn
11 samples have been analysed for Sulfate at South Central Water Assn.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every Sulfate result
The table below lists 1–10 of 11 samples, newest first — collected February 11, 2004 to November 6, 2020.
10 Sulfate results from the 10 samples listed here: 8 detected, 2 not detected. Those samples also carried 160 results for other analytes, which are on the full results page.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| 3.262 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 6, 2020, sampling point WL005 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| Not detected below 2 mg/l Minimum Reporting Level , sample collected Nov 6, 2020, sampling point WL004 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| 28.407 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 6, 2020, sampling point WL003 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| 32.406 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 6, 2020, sampling point WL002 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| 26.279 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 6, 2020, sampling point WL001 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| Not detected below 2.5 mg/l Minimum Reporting Level , sample collected Dec 9, 2008, sampling point WL004 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| 34.3 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Dec 9, 2008, sampling point WL003 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| 31.6 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Dec 9, 2008, sampling point WL002 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| 31.7 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Dec 9, 2008, sampling point WL001 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| 32.4 mg/l , sample collected Feb 11, 2004, sampling point ST060 | Sulfate 1055 EPA method 300.0 | Not recorded |
-
- Collected
- Nov 6, 2020
- Sampling point
- WL005
- Sample type
- Routine
- Lab sample
- 201106-005PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 3.262 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Nov 6, 2020
- Sampling point
- WL004 Well W004
- Sample type
- Routine
- Lab sample
- 201106-004PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- Not detected below 2 mg/l Minimum Reporting Level
-
- Collected
- Nov 6, 2020
- Sampling point
- WL003 Well W003
- Sample type
- Routine
- Lab sample
- 201106-003PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 28.407 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Nov 6, 2020
- Sampling point
- WL002 Well W002
- Sample type
- Routine
- Lab sample
- 201106-002PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 32.406 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Nov 6, 2020
- Sampling point
- WL001 Well W001
- Sample type
- Routine
- Lab sample
- 201106-001PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 26.279 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Dec 9, 2008
- Sampling point
- WL004 Well W004
- Sample type
- Routine
- Lab sample
- 081211-004PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- Not detected below 2.5 mg/l Minimum Reporting Level
-
- Collected
- Dec 9, 2008
- Sampling point
- WL003 Well W003
- Sample type
- Routine
- Lab sample
- 081211-003PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 34.3 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Dec 9, 2008
- Sampling point
- WL002 Well W002
- Sample type
- Routine
- Lab sample
- 081211-002PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 31.6 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Dec 9, 2008
- Sampling point
- WL001 Well W001
- Sample type
- Routine
- Lab sample
- 081211-001PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 31.7 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Feb 11, 2004
- Sampling point
- ST060 Tank S060
- Sample type
- Routine
- Lab sample
- 040212-020IN
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 32.4 mg/l
Routine (10).