Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Sulfate results

MS0300005 , City of Ocean Springs

17 samples have been analysed for Sulfate at City of Ocean Springs.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Sulfate result

The table below lists 1–10 of 17 samples, newest first — collected February 11, 2004 to February 27, 2018.

10 Sulfate results from the 10 samples listed here: 10 detected, 0 not detected. Those samples also carried 141 results for other analytes, which are on the full results page.

Sulfate results for City of Ocean Springs, from 1 to 10 of 17 samples shown analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Feb 27, 2018
Sampling point
WL012 Well 012
Sample type
Routine
Lab sample
180228-010PC
Laboratory
MSDH Lab
8.009 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Feb 27, 2018, sampling point WL012 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Feb 27, 2018
Sampling point
WL011 Well W011
Sample type
Routine
Lab sample
180228-009PC
Laboratory
MSDH Lab
3.128 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Feb 27, 2018, sampling point WL011 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Feb 27, 2018
Sampling point
WL010 Well W010
Sample type
Routine
Lab sample
180228-008PC
Laboratory
MSDH Lab
6.377 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Feb 27, 2018, sampling point WL010 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Feb 27, 2018
Sampling point
WL006 Well W006
Sample type
Routine
Lab sample
180228-007PC
Laboratory
MSDH Lab
7.318 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Feb 27, 2018, sampling point WL006 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Mar 14, 2017
Sampling point
WL009 Well W009
Sample type
Routine
Lab sample
170315-004PC
Laboratory
MSDH Lab
6.153 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 14, 2017, sampling point WL009 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Mar 14, 2017
Sampling point
WL003 Well W003
Sample type
Routine
Lab sample
170315-003PC
Laboratory
MSDH Lab
6.435 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 14, 2017, sampling point WL003 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Sep 9, 2008
Sampling point
WL012 Well 012
Sample type
Routine
Lab sample
080912-001PC
Laboratory
MSDH Lab
6.24 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Sep 9, 2008, sampling point WL012 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Feb 25, 2004
Sampling point
TF111 Treatment Plant T111
Sample type
Routine
Lab sample
040227-025IN
Laboratory
MSDH Lab
6.94 mg/l , sample collected Feb 25, 2004, sampling point TF111 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Feb 11, 2004
Sampling point
TF103 Treatment Plant T103
Sample type
Routine
Lab sample
040212-030IN
Laboratory
MSDH Lab
5.82 mg/l , sample collected Feb 11, 2004, sampling point TF103 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Feb 11, 2004
Sampling point
TF109 Treatment Plant T109
Sample type
Routine
Lab sample
040212-029IN
Laboratory
MSDH Lab
5.84 mg/l , sample collected Feb 11, 2004, sampling point TF109 Sulfate 1055 EPA method 300.0 Not recorded

Routine (10).