Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Sodium results

MS0320013 , Lorman Water Association

13 samples have been analysed for Sodium at Lorman Water Association.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Sodium result

The table below lists 11–13 of 13 samples, newest first — collected June 8, 2010 to April 26, 2017.

3 Sodium results from the 3 samples listed here: 3 detected, 0 not detected. Those samples also carried 50 results for other analytes, which are on the full results page.

Sodium results for Lorman Water Association, from 11 to 13 of 13 samples shown analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Apr 26, 2017 12:30
Sampling point
WL002 Well W002
Sample type
Routine
Lab sample
170427-002PC
Laboratory
MSDH Lab
134.8972 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Apr 26, 2017 12:30, sampling point WL002 Sodium 1052 EPA method 200.8 Not recorded
Collected
Apr 17, 2012
Sampling point
WL002 Well W002
Sample type
Routine
Lab sample
120418-001PC
Laboratory
MSDH Lab
139 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Apr 17, 2012, sampling point WL002 Sodium 1052 EPA method 200.8 Not recorded
Collected
Jun 8, 2010
Sampling point
WL003 Well W003
Sample type
Routine
Lab sample
100609-001PC
Laboratory
MSDH Lab
171 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 8, 2010, sampling point WL003 Sodium 1052 EPA method 200.8 Not recorded

Routine (3).