This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Radium-226 results
MS0370001 , Arnold Line Water Association
21 samples have been analysed for Radium-226 at Arnold Line Water Association.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every Radium-226 result
The table below lists 11–20 of 21 samples, newest first — collected September 21, 2009 to May 16, 2012.
10 Radium-226 results from the 10 samples listed here: 5 detected, 5 not detected. Those samples also carried 45 results for other analytes, which are on the full results page.
Units in this table
Radium-226 is recorded on this page in ug/l, mg/l and pci/l.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| Not detected below 0.236 pci/l Minimum Reporting Level , sample collected May 16, 2012 12:30, sampling point TF104 | Radium-226 4020 EPA method 903.1 | Apr 1, 2012 – Jun 30, 2012 |
|
||
| Not detected below 0.248 pci/l Minimum Reporting Level , sample collected May 16, 2012 12:05, sampling point TF106 | Radium-226 4020 EPA method 903.1 | Apr 1, 2012 – Jun 30, 2012 |
|
||
| Not detected below 0.169 pci/l Minimum Reporting Level , sample collected Mar 5, 2012 12:50, sampling point TF105 | Radium-226 4020 EPA method 903.1 | Jan 1, 2012 – Mar 31, 2012 |
|
||
| Not detected below 0.236 pci/l Minimum Reporting Level , sample collected Mar 5, 2012 13:10, sampling point TF104 | Radium-226 4020 EPA method 903.1 | Jan 1, 2012 – Mar 31, 2012 |
|
||
| Not detected below 0.248 pci/l Minimum Reporting Level , sample collected Mar 5, 2012 12:35, sampling point TF106 | Radium-226 4020 EPA method 903.1 | Jan 1, 2012 – Mar 31, 2012 |
|
||
| 0.251 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 8, 2010, sampling point TF106 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 0.008 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 8, 2010, sampling point TF105 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 0.098 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 8, 2010, sampling point TF104 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 0.272 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Sep 21, 2009, sampling point TF105 | Radium-226 4020 EPA method 903 | Jul 1, 2009 – Sep 30, 2009 |
|
||
| 0.388 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Sep 21, 2009, sampling point TF104 | Radium-226 4020 EPA method 903 | Jul 1, 2009 – Sep 30, 2009 |
-
- Collected
- May 16, 2012 12:30
- Sampling point
- TF104 Treatment Plant T104
- Sample type
- Routine
- Lab sample
- 120517-005
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Apr 1, 2012 – Jun 30, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- Not detected below 0.236 pci/l Minimum Reporting Level
-
- Collected
- May 16, 2012 12:05
- Sampling point
- TF106
- Sample type
- Routine
- Lab sample
- 120517-017
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Apr 1, 2012 – Jun 30, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- Not detected below 0.248 pci/l Minimum Reporting Level
-
- Collected
- Mar 5, 2012 12:50
- Sampling point
- TF105
- Sample type
- Routine
- Lab sample
- 120306-009
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Jan 1, 2012 – Mar 31, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- Not detected below 0.169 pci/l Minimum Reporting Level
-
- Collected
- Mar 5, 2012 13:10
- Sampling point
- TF104 Treatment Plant T104
- Sample type
- Routine
- Lab sample
- 120306-008
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Jan 1, 2012 – Mar 31, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- Not detected below 0.236 pci/l Minimum Reporting Level
-
- Collected
- Mar 5, 2012 12:35
- Sampling point
- TF106
- Sample type
- Routine
- Lab sample
- 120306-010
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Jan 1, 2012 – Mar 31, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- Not detected below 0.248 pci/l Minimum Reporting Level
-
- Collected
- Mar 8, 2010
- Sampling point
- TF106
- Sample type
- Routine
- Lab sample
- 00351-003
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.251 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Mar 8, 2010
- Sampling point
- TF105
- Sample type
- Routine
- Lab sample
- 00351-002
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.008 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Mar 8, 2010
- Sampling point
- TF104 Treatment Plant T104
- Sample type
- Routine
- Lab sample
- 00351-001
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.098 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Sep 21, 2009
- Sampling point
- TF105
- Sample type
- Routine
- Lab sample
- 02366-003
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jul 1, 2009 – Sep 30, 2009
-
Radium-226 4020 EPA method 903
- Result
- 0.272 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Sep 21, 2009
- Sampling point
- TF104 Treatment Plant T104
- Sample type
- Routine
- Lab sample
- 02366-002
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jul 1, 2009 – Sep 30, 2009
-
Radium-226 4020 EPA method 903
- Result
- 0.388 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
Routine (10).