Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

TTHM results

MS0370010 , Town of Sumrall

10 samples have been analysed for TTHM at Town of Sumrall.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every TTHM result

All 10 samples analysed for this analyte are listed below, newest first. No date range is applied.

10 TTHM results from the 10 samples listed here: 7 detected, 3 not detected. Those samples also carried 30 results for other analytes, which are on the full results page.

Units in this table

TTHM is recorded on this page in ug/l and mg/l. 1 mg/l = 1,000 ug/l.

TTHM results for Town of Sumrall, from the 10 samples analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Dec 29, 2025 12:30
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
810-176825-1
Laboratory
Eurofins Eaton Analytical South Bend in
0.63 ug/l , sample collected Dec 29, 2025 12:30, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2025 – Dec 31, 2025
Collected
Dec 8, 2025 11:25
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
810-174480-1
Laboratory
Eurofins Eaton Analytical South Bend in
16.01 ug/l , sample collected Dec 8, 2025 11:25, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2025 – Dec 31, 2025
Collected
May 20, 2024 10:50
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
TH-240521-005
Laboratory
MSDH Lab
Not detected below 1 ug/l Minimum Reporting Level , sample collected May 20, 2024 10:50, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2024 – Dec 31, 2024
Collected
Aug 15, 2023 10:46
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
TH-230816-009
Laboratory
MSDH Lab
Not detected below 1 ug/l Minimum Reporting Level , sample collected Aug 15, 2023 10:46, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2023 – Dec 31, 2023
Collected
May 2, 2022 08:30
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
TH-220503-017
Laboratory
MSDH Lab
Not detected below 1 ug/l Minimum Reporting Level , sample collected May 2, 2022 08:30, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2022 – Dec 31, 2022
Collected
Jul 6, 2015 13:05
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
150707-028TH
Laboratory
MSDH Lab
3.89 ug/l , sample collected Jul 6, 2015 13:05, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2014 – Dec 31, 2016
Collected
Jun 26, 2013 13:00
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
130627-013TH
Laboratory
MSDH Lab
2.92 ug/l , sample collected Jun 26, 2013 13:00, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2011 – Dec 31, 2013
Collected
Sep 22, 2009
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
090923-002TH
Laboratory
MSDH Lab
0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Sep 22, 2009, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2008 – Dec 31, 2010
Collected
Sep 18, 2007
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
070919-014TH
Laboratory
MSDH Lab
0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Sep 18, 2007, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2005 – Dec 31, 2007
Collected
Jun 21, 2004
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
040622-013TH
Laboratory
MSDH Lab
3.44 ug/l , sample collected Jun 21, 2004, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2004 – Dec 31, 2004

Routine (10).