This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
TTHM results
MS0380006 , North Lauderdale W/A, Inc
53 samples have been analysed for TTHM at North Lauderdale W/A, Inc.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every TTHM result
The table below lists 31–40 of 53 samples, newest first — collected July 1, 2008 to December 17, 2013.
10 TTHM results from the 10 samples listed here: 4 detected, 6 not detected. Those samples also carried 40 results for other analytes, which are on the full results page.
Units in this table
TTHM is recorded on this page in ug/l and mg/l. 1 mg/l = 1,000 ug/l.
We withheld the location of 4 sampling points below. The location on record identifies a private home, and we do not publish those. That is our decision, not the agency’s. The sampling point, its type and every result taken there are published unchanged.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| Not detected below 4 ug/l Minimum Reporting Level , sample collected Dec 17, 2013 01:12, sampling point SM4 | TTHM 2950 EPA method 524.2 | Oct 1, 2013 – Dec 31, 2013 |
|
||
| Not detected below 4 ug/l Minimum Reporting Level , sample collected Dec 17, 2013 01:38, sampling point SM2 | TTHM 2950 EPA method 524.2 | Oct 1, 2013 – Dec 31, 2013 |
|
||
| Not detected below 4 ug/l Minimum Reporting Level , sample collected Dec 17, 2013 12:46, sampling point SM3 | TTHM 2950 EPA method 524.2 | Oct 1, 2013 – Dec 31, 2013 |
|
||
| Not detected below 4 ug/l Minimum Reporting Level , sample collected Dec 17, 2013 12:23, sampling point SM1 | TTHM 2950 EPA method 524.2 | Oct 1, 2013 – Dec 31, 2013 |
|
||
| 1.1 ug/l , sample collected Jun 18, 2013 12:11, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jan 1, 2013 – Dec 31, 2013 |
|
||
| Not detected below 4 ug/l Minimum Reporting Level , sample collected Jun 5, 2012 12:02, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jan 1, 2012 – Dec 31, 2012 |
|
||
| Not detected below 4 ug/l Minimum Reporting Level , sample collected Jul 25, 2011 12:10, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jan 1, 2011 – Dec 31, 2011 |
|
||
| 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 18, 2010, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jan 1, 2010 – Dec 31, 2010 |
|
||
| 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 25, 2009, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jan 1, 2009 – Dec 31, 2009 |
|
||
| 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jul 1, 2008, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jan 1, 2008 – Dec 31, 2008 |
-
- Collected
- Dec 17, 2013 01:12
- Sampling point
- SM4 Location withheld
- Sample type
- Routine
- Lab sample
- 131218-004TH
- Laboratory
- MSDH Lab
- Monitoring period
- Oct 1, 2013 – Dec 31, 2013
-
TTHM 2950 EPA method 524.2
- Result
- Not detected below 4 ug/l Minimum Reporting Level
-
- Collected
- Dec 17, 2013 01:38
- Sampling point
- SM2 Location withheld
- Sample type
- Routine
- Lab sample
- 131218-003TH
- Laboratory
- MSDH Lab
- Monitoring period
- Oct 1, 2013 – Dec 31, 2013
-
TTHM 2950 EPA method 524.2
- Result
- Not detected below 4 ug/l Minimum Reporting Level
-
- Collected
- Dec 17, 2013 12:46
- Sampling point
- SM3 Location withheld
- Sample type
- Routine
- Lab sample
- 131218-002TH
- Laboratory
- MSDH Lab
- Monitoring period
- Oct 1, 2013 – Dec 31, 2013
-
TTHM 2950 EPA method 524.2
- Result
- Not detected below 4 ug/l Minimum Reporting Level
-
- Collected
- Dec 17, 2013 12:23
- Sampling point
- SM1 Location withheld
- Sample type
- Routine
- Lab sample
- 131218-001TH
- Laboratory
- MSDH Lab
- Monitoring period
- Oct 1, 2013 – Dec 31, 2013
-
TTHM 2950 EPA method 524.2
- Result
- Not detected below 4 ug/l Minimum Reporting Level
-
- Collected
- Jun 18, 2013 12:11
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 130619-001TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2013 – Dec 31, 2013
-
TTHM 2950 EPA method 524.2
- Result
- 1.1 ug/l
-
- Collected
- Jun 5, 2012 12:02
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 120606-007TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2012 – Dec 31, 2012
-
TTHM 2950 EPA method 524.2
- Result
- Not detected below 4 ug/l Minimum Reporting Level
-
- Collected
- Jul 25, 2011 12:10
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 110726-006TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2011 – Dec 31, 2011
-
TTHM 2950 EPA method 524.2
- Result
- Not detected below 4 ug/l Minimum Reporting Level
-
- Collected
- Aug 18, 2010
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 100819-011TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2010 – Dec 31, 2010
-
TTHM 2950 EPA method 524.2
- Result
- 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Aug 25, 2009
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 090826-001TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2009 – Dec 31, 2009
-
TTHM 2950 EPA method 524.2
- Result
- 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jul 1, 2008
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 080702-003TH
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2008 – Dec 31, 2008
-
TTHM 2950 EPA method 524.2
- Result
- 0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
Routine (10).