Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Sulfate results

MS0390003 , Town of Monticello

4 samples have been analysed for Sulfate at Town of Monticello.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Sulfate result

All 4 samples analysed for this analyte are listed below, newest first. No date range is applied.

4 Sulfate results from the 4 samples listed here: 4 detected, 0 not detected. Those samples also carried 52 results for other analytes, which are on the full results page.

Sulfate results for Town of Monticello, from the 4 samples analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
May 13, 2010
Sampling point
WL004 Well W004
Sample type
Routine
Lab sample
100514-007PC
Laboratory
MSDH Lab
7.908 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected May 13, 2010, sampling point WL004 Sulfate 1055 EPA method 300.0 Not recorded
Collected
May 13, 2010
Sampling point
WL005 Well W005
Sample type
Routine
Lab sample
100514-005PC
Laboratory
MSDH Lab
8.541 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected May 13, 2010, sampling point WL005 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Mar 1, 2004
Sampling point
TF080 Treatment Plant T080
Sample type
Routine
Lab sample
040302-028IN
Laboratory
MSDH Lab
9.74 mg/l , sample collected Mar 1, 2004, sampling point TF080 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Oct 8, 2003
Sampling point
TF080 Treatment Plant T080
Sample type
Routine
Lab sample
031009-054IN
Laboratory
MSDH Lab
7.83 mg/l , sample collected Oct 8, 2003, sampling point TF080 Sulfate 1055 EPA method 300.0 Not recorded

Routine (4).