Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Sulfate results

MS0400015 , Tyson Foods #1

2 samples have been analysed for Sulfate at Tyson Foods #1.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Sulfate result

All 2 samples analysed for this analyte are listed below, newest first. No date range is applied.

2 Sulfate results from the 2 samples listed here: 2 detected, 0 not detected. Those samples also carried 22 results for other analytes, which are on the full results page.

Sulfate results for Tyson Foods #1, from the 2 samples analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Mar 1, 2004
Sampling point
ST060 Tank S060
Sample type
Routine
Lab sample
040302-065IN
Laboratory
MSDH Lab
5.54 mg/l , sample collected Mar 1, 2004, sampling point ST060 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Oct 1, 2003
Sampling point
ST060 Tank S060
Sample type
Routine
Lab sample
031002-078IN
Laboratory
MSDH Lab
4.83 mg/l , sample collected Oct 1, 2003, sampling point ST060 Sulfate 1055 EPA method 300.0 Not recorded

Routine (2).