This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Analytes tested for
MS0410031 , City of Tupelo-Indian Hills
City of Tupelo-Indian Hills has been analysed for 7 analytes.
This is what has been looked for, not what has been found. Which of them have been detected, and when, is on the sample results page.
The agency also publishes one analyte list across every system it serves. That list carries no results and no counts, and it leaves out coliform and the other microbiological analytes — which this page does not.
6 of these are chemical, radiological or water-quality analytes, and their results are on the chemical and radiological samples page — which counts 6, not 7, for that reason. The other 1 — Coliform (TCR) — is an organism, and its records live with the coliform and microbial samples.
| Analyte | Kind | Results on record | Last collected |
|---|---|---|---|
| Bromodichloromethane 2943 | Organic Chemical | 1 | Jun 13, 2007 |
| Bromoform 2942 | Organic Chemical | 1 | Jun 13, 2007 |
| Chloroform 2941 | Organic Chemical | 1 | Jun 13, 2007 |
| Coliform (TCR) 3100 | Organism | 56 | Jun 26, 2008 |
| Dibromochloromethane 2944 | Organic Chemical | 1 | Jun 13, 2007 |
| Total Haloacetic Acids (Haa5) 2456 | Organic Chemical | 1 | Jun 13, 2007 |
| TTHM 2950 | Organic Chemical | 1 | Jun 13, 2007 |
A result is one laboratory analysis for one analyte on one sample, whether or not anything was found. Counts cover every Accepted or Validated result on record, with no date range applied.
What an analyte is
“Analytes are contaminants and other elements (some of which are not necessarily contaminants), for which the drinking water is being analyzed.”
From the help text published with these pages.