Chemical and radiological sample results

MS0540008 ·, Hebron Water Association

What has been detected, ever

Every analyte measured above its reporting level at any point in this system’s record, most often detected first. This is not limited to the samples listed below.

Scroll the table sideways for the dates.

No date range is applied: this list draws on every sample on record. Show the last two years only.

The most recent samples, result by result

The table below lists 191–200 of 282 samples, newest first — collected July 13, 2009 to January 11, 2010. The summary above covers all 282.

100 results from the 10 samples listed here: 9 detected, 91 not detected. Across the whole record it is 310 of 1,462. A sample is analysed for many analytes at once, so one sample appears on as many rows as it had results.

• Collected

  Jan 11, 2010

  Sampling point

  SM2 SM2

  Sample type

  Routine

  Lab sample

  100115-008TH

  Laboratory

  MSDH Lab

  Monitoring period

  Not recorded

  • Chloroform 2941 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Bromoform 2942 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Bromodichloromethane 2943 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Dibromochloromethane 2944 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • TTHM 2950 EPA method 524.2

    Result

    0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

• Collected

  Jan 11, 2010

  Sampling point

  SM1 SM1

  Sample type

  Routine

  Lab sample

  100115-007TH

  Laboratory

  MSDH Lab

  Monitoring period

  Not recorded

  • Chloroform 2941 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Bromoform 2942 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Bromodichloromethane 2943 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Dibromochloromethane 2944 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • TTHM 2950 EPA method 524.2

    Result

    0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

• Collected

  Nov 2, 2009

  Sampling point

  SM2 SM2

  Sample type

  Routine

  Lab sample

  091103-042HA

  Laboratory

  MSDH Lab

  Monitoring period

  Not recorded

  • Monochloroacetic Acid 2450 EPA method 552.2

    Result

    0.003 mg/l

  • Dichloroacetic Acid 2451 EPA method 552.2

    Result

    Not detected below 0.001 mg/l Minimum Reporting Level

  • Trichloroacetic Acid 2452 EPA method 552.2

    Result

    Not detected below 0.001 mg/l Minimum Reporting Level

  • Monobromoacetic Acid 2453 EPA method 552.2

    Result

    Not detected below 0.001 mg/l Minimum Reporting Level

  • Dibromoacetic Acid 2454 EPA method 552.2

    Result

    Not detected below 0.001 mg/l Minimum Reporting Level

  • Total Haloacetic Acids (Haa5) 2456

    Result

    0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here.

• Collected

  Nov 2, 2009

  Sampling point

  SM1 SM1

  Sample type

  Routine

  Lab sample

  091103-041HA

  Laboratory

  MSDH Lab

  Monitoring period

  Not recorded

  • Monochloroacetic Acid 2450 EPA method 552.2

    Result

    0.003 mg/l

  • Dichloroacetic Acid 2451 EPA method 552.2

    Result

    Not detected below 0.001 mg/l Minimum Reporting Level

  • Trichloroacetic Acid 2452 EPA method 552.2

    Result

    Not detected below 0.001 mg/l Minimum Reporting Level

  • Monobromoacetic Acid 2453 EPA method 552.2

    Result

    Not detected below 0.001 mg/l Minimum Reporting Level

  • Dibromoacetic Acid 2454 EPA method 552.2

    Result

    Not detected below 0.001 mg/l Minimum Reporting Level

  • Total Haloacetic Acids (Haa5) 2456

    Result

    0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here.

• Collected

  Nov 2, 2009

  Sampling point

  SM2 SM2

  Sample type

  Routine

  Lab sample

  091103-042TH

  Laboratory

  MSDH Lab

  Monitoring period

  Not recorded

  • Chloroform 2941 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Bromoform 2942 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Bromodichloromethane 2943 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Dibromochloromethane 2944 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • TTHM 2950 EPA method 524.2

    Result

    0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

• Collected

  Nov 2, 2009

  Sampling point

  SM1 SM1

  Sample type

  Routine

  Lab sample

  091103-041TH

  Laboratory

  MSDH Lab

  Monitoring period

  Not recorded

  • Chloroform 2941 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Bromoform 2942 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Bromodichloromethane 2943 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Dibromochloromethane 2944 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • TTHM 2950 EPA method 524.2

    Result

    0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

• Collected

  Oct 5, 2009

  Sampling point

  TF103 Treatment Plant T103

  Sample type

  Routine

  Lab sample

  091006-005VO

  Laboratory

  MSDH Lab

  Monitoring period

  Jan 1, 2005 – Dec 31, 2010

  • 1,2,4-Trichlorobenzene 2378 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Cis-1,2-Dichloroethylene 2380 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Xylenes, Total 2955 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Dichloromethane 2964 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • O-Dichlorobenzene 2968 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • P-Dichlorobenzene 2969 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Vinyl Chloride 2976 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,1-Dichloroethylene 2977 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Trans-1,2-Dichloroethylene 2979 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,2-Dichloroethane 2980 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,1,1-Trichloroethane 2981 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Carbon Tetrachloride 2982 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,2-Dichloropropane 2983 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Trichloroethylene 2984 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,1,2-Trichloroethane 2985 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Tetrachloroethylene 2987 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Chlorobenzene 2989 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Benzene 2990 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Toluene 2991 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Ethylbenzene 2992 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Styrene 2996 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

• Collected

  Oct 5, 2009

  Sampling point

  TF102 Treatment Plant T102

  Sample type

  Routine

  Lab sample

  091006-004VO

  Laboratory

  MSDH Lab

  Monitoring period

  Jan 1, 2005 – Dec 31, 2010

  • 1,2,4-Trichlorobenzene 2378 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Cis-1,2-Dichloroethylene 2380 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Xylenes, Total 2955 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Dichloromethane 2964 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • O-Dichlorobenzene 2968 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • P-Dichlorobenzene 2969 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Vinyl Chloride 2976 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,1-Dichloroethylene 2977 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Trans-1,2-Dichloroethylene 2979 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,2-Dichloroethane 2980 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,1,1-Trichloroethane 2981 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Carbon Tetrachloride 2982 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,2-Dichloropropane 2983 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Trichloroethylene 2984 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,1,2-Trichloroethane 2985 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Tetrachloroethylene 2987 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Chlorobenzene 2989 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Benzene 2990 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Toluene 2991 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Ethylbenzene 2992 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Styrene 2996 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

• Collected

  Oct 5, 2009

  Sampling point

  TF101 Treatment Plant T101

  Sample type

  Routine

  Lab sample

  091006-003VO

  Laboratory

  MSDH Lab

  Monitoring period

  Jan 1, 2005 – Dec 31, 2010

  • 1,2,4-Trichlorobenzene 2378 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Cis-1,2-Dichloroethylene 2380 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Xylenes, Total 2955 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Dichloromethane 2964 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • O-Dichlorobenzene 2968 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • P-Dichlorobenzene 2969 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Vinyl Chloride 2976 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,1-Dichloroethylene 2977 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Trans-1,2-Dichloroethylene 2979 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,2-Dichloroethane 2980 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,1,1-Trichloroethane 2981 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Carbon Tetrachloride 2982 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,2-Dichloropropane 2983 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Trichloroethylene 2984 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,1,2-Trichloroethane 2985 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Tetrachloroethylene 2987 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Chlorobenzene 2989 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Benzene 2990 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Toluene 2991 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Ethylbenzene 2992 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Styrene 2996 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

• Collected

  Jul 13, 2009

  Sampling point

  SM2 SM2

  Sample type

  Routine

  Lab sample

  090714-016TH

  Laboratory

  MSDH Lab

  Monitoring period

  Not recorded

  • Chloroform 2941 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Bromoform 2942 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Bromodichloromethane 2943 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • Dibromochloromethane 2944 EPA method 524.2

    Result

    Not detected below 1 ug/l Minimum Reporting Level

  • TTHM 2950 EPA method 524.2

    Result

    0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

Routine (10).