Chemical and radiological sample results

MS0550061 ·, PRCUA-Poplarville Water System

What has been detected, ever

Every analyte measured above its reporting level at any point in this system’s record, most often detected first. This is not limited to the samples listed below.

Scroll the table sideways for the dates.

No date range is applied: this list draws on every sample on record. Show the last two years only.

The most recent samples, result by result

The table below lists 61–62 of 62 samples, newest first — collected October 16, 2008 to November 4, 2008. The summary above covers all 62.

39 results from the 2 samples listed here: 17 detected, 22 not detected. A sample is analysed for many analytes at once, so one sample appears on as many rows as it had results.

• Collected

  Nov 4, 2008

  Sampling point

  TF101

  Sample type

  Routine

  Lab sample

  081105-002VO

  Laboratory

  MSDH Lab

  Monitoring period

  Oct 1, 2008 – Dec 31, 2008

  • 1,2,4-Trichlorobenzene 2378 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Cis-1,2-Dichloroethylene 2380 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Xylenes, Total 2955 EPA method 524.2

    Result

    5.27 ug/l

  • Dichloromethane 2964 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • O-Dichlorobenzene 2968 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • P-Dichlorobenzene 2969 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Vinyl Chloride 2976 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,1-Dichloroethylene 2977 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Trans-1,2-Dichloroethylene 2979 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,2-Dichloroethane 2980 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,1,1-Trichloroethane 2981 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Carbon Tetrachloride 2982 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,2-Dichloropropane 2983 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Trichloroethylene 2984 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • 1,1,2-Trichloroethane 2985 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Tetrachloroethylene 2987 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Chlorobenzene 2989 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Benzene 2990 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Toluene 2991 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

  • Ethylbenzene 2992 EPA method 524.2

    Result

    1.14 ug/l

  • Styrene 2996 EPA method 524.2

    Result

    Not detected below 0.0005 mg/l Method Detection Limit

• Collected

  Oct 16, 2008

  Sampling point

  WL001

  Sample type

  Routine

  Lab sample

  081017-001PC

  Laboratory

  MSDH Lab

  Monitoring period

  Not recorded

  • Calcium 1016 EPA method 200.8

    Result

    1.94 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • Chloride 1017 EPA method 300.0

    Result

    Not detected below 2.5 mg/l Minimum Reporting Level

  • Fluoride 1025 EPA method 380-75WE

    Result

    Not detected below 0.1 mg/l Minimum Reporting Level

  • Iron 1028 EPA method 200.8

    Result

    Not detected below 0.1 mg/l Minimum Reporting Level

  • Magnesium 1031 EPA method 200.8

    Result

    0.532 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • Manganese 1032 EPA method 200.8

    Result

    0.004 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • Potassium 1042 EPA method 200.8

    Result

    2.08 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • Sodium 1052 EPA method 200.8

    Result

    4.12 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • Sulfate 1055 EPA method 300.0

    Result

    3.95 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • Residue, Total, Filterable 1057 EPA method CALCUL LAB

    Result

    26 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • Alkalinity, Caco3 Stability 1067 EPA method 2320B

    Result

    0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • Carbon Dioxide 1901 EPA method CALCUL LAB

    Result

    59 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • Hardness, Total (As Caco3) 1915 EPA method CALCUL LAB

    Result

    6.8 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • Alkalinity, Total 1927 EPA method 2320B

    Result

    17 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • Iron, Field Result FEFD EPA method 3500AL-D

    Result

    0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0.0" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • Calculated Sodium NACA EPA method CALCUL LAB

    Result

    7.3 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • PH, Field Result PHFD EPA method 3500AL-D

    Result

    5.8 ph The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

  • Temperature, Field Result TEMP EPA method VISOB

    Result

    74 f The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.

Routine (2).