Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Carbon Dioxide results

MS0600003 , Town of Crowder

1 sample has been analysed for Carbon Dioxide at Town of Crowder.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Carbon Dioxide result

All 1 samples analysed for this analyte are listed below, newest first. No date range is applied.

1 Carbon Dioxide result from the 1 sample listed here: 1 detected, 0 not detected. Those samples also carried 17 results for other analytes, which are on the full results page.

Carbon Dioxide results for Town of Crowder, from the 1 samples analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Nov 3, 2010
Sampling point
WL002 Well W002
Sample type
Routine
Lab sample
101105-004PC
Laboratory
MSDH Lab
0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. , sample collected Nov 3, 2010, sampling point WL002 Carbon Dioxide 1901 EPA method CALCUL LAB Not recorded

Routine (1).