This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Radium-226 results
MS0610008 , Fannin Water Assn-North
28 samples have been analysed for Radium-226 at Fannin Water Assn-North.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every Radium-226 result
The table below lists 21–28 of 28 samples, newest first — collected September 24, 2009 to March 11, 2010.
8 Radium-226 results from the 8 samples listed here: 7 detected, 1 not detected. Those samples also carried 45 results for other analytes, which are on the full results page.
Units in this table
Radium-226 is recorded on this page in ug/l, mg/l and pci/l.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| 0.01 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 11, 2010, sampling point TF102 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 0.064 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 11, 2010, sampling point TF101 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 0.015 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 11, 2010, sampling point TF104 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 0.001 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 11, 2010, sampling point TF103 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 1.476 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Sep 24, 2009, sampling point TF102 | Radium-226 4020 EPA method 903 | Jul 1, 2009 – Sep 30, 2009 |
|
||
| 0.225 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Sep 24, 2009, sampling point TF104 | Radium-226 4020 EPA method 903 | Jul 1, 2009 – Sep 30, 2009 |
|
||
| Not detected below 1 pci/l Minimum Reporting Level , sample collected Sep 24, 2009, sampling point TF101 | Radium-226 4020 EPA method 903 | Jul 1, 2009 – Sep 30, 2009 |
|
||
| 0.17 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Sep 24, 2009, sampling point TF103 | Radium-226 4020 EPA method 903 | Jul 1, 2009 – Sep 30, 2009 |
-
- Collected
- Mar 11, 2010
- Sampling point
- TF102 Treatment Plant T102
- Sample type
- Routine
- Lab sample
- 00438-002
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.01 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Mar 11, 2010
- Sampling point
- TF101 Treatment Plant T101
- Sample type
- Routine
- Lab sample
- 00438-001
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.064 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Mar 11, 2010
- Sampling point
- TF104
- Sample type
- Routine
- Lab sample
- 00438-004
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.015 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Mar 11, 2010
- Sampling point
- TF103 Treatment Plant T103
- Sample type
- Routine
- Lab sample
- 00438-003
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.001 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Sep 24, 2009
- Sampling point
- TF102 Treatment Plant T102
- Sample type
- Routine
- Lab sample
- 02346-004
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jul 1, 2009 – Sep 30, 2009
-
Radium-226 4020 EPA method 903
- Result
- 1.476 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Sep 24, 2009
- Sampling point
- TF104
- Sample type
- Routine
- Lab sample
- 02346-003
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jul 1, 2009 – Sep 30, 2009
-
Radium-226 4020 EPA method 903
- Result
- 0.225 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Sep 24, 2009
- Sampling point
- TF101 Treatment Plant T101
- Sample type
- Routine
- Lab sample
- 02346-002
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jul 1, 2009 – Sep 30, 2009
-
Radium-226 4020 EPA method 903
- Result
- Not detected below 1 pci/l Minimum Reporting Level
-
- Collected
- Sep 24, 2009
- Sampling point
- TF103 Treatment Plant T103
- Sample type
- Routine
- Lab sample
- 02346-001
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jul 1, 2009 – Sep 30, 2009
-
Radium-226 4020 EPA method 903
- Result
- 0.17 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
Routine (8).