Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Sulfate results

MS0610012 , Langford Water Association

8 samples have been analysed for Sulfate at Langford Water Association.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Sulfate result

All 8 samples analysed for this analyte are listed below, newest first. No date range is applied.

8 Sulfate results from the 8 samples listed here: 8 detected, 0 not detected. Those samples also carried 99 results for other analytes, which are on the full results page.

Sulfate results for Langford Water Association, from the 8 samples analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Nov 12, 2010
Sampling point
WL005
Sample type
Routine
Lab sample
101116-002PC
Laboratory
MSDH Lab
5.44 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL005 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Apr 23, 2009
Sampling point
DS000 Distribution
Sample type
Routine
Lab sample
090423-002PC
Laboratory
MSDH Lab
5.36 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Apr 23, 2009, sampling point DS000 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Mar 29, 2004
Sampling point
TF104 Treatment Plant T104
Sample type
Routine
Lab sample
040330-008IN
Laboratory
MSDH Lab
6.82 mg/l , sample collected Mar 29, 2004, sampling point TF104 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Mar 29, 2004
Sampling point
TF103 Treatment Plant T103
Sample type
Routine
Lab sample
040330-007IN
Laboratory
MSDH Lab
6.56 mg/l , sample collected Mar 29, 2004, sampling point TF103 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Mar 29, 2004
Sampling point
TF102 Treatment Plant T102
Sample type
Routine
Lab sample
040330-006IN
Laboratory
MSDH Lab
7.12 mg/l , sample collected Mar 29, 2004, sampling point TF102 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Oct 20, 2003
Sampling point
TF104 Treatment Plant T104
Sample type
Routine
Lab sample
031021-032IN
Laboratory
MSDH Lab
6.95 mg/l , sample collected Oct 20, 2003, sampling point TF104 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Oct 20, 2003
Sampling point
TF102 Treatment Plant T102
Sample type
Routine
Lab sample
031021-031IN
Laboratory
MSDH Lab
7.02 mg/l , sample collected Oct 20, 2003, sampling point TF102 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Oct 20, 2003
Sampling point
TF103 Treatment Plant T103
Sample type
Routine
Lab sample
031021-030IN
Laboratory
MSDH Lab
7.07 mg/l , sample collected Oct 20, 2003, sampling point TF103 Sulfate 1055 EPA method 300.0 Not recorded

Routine (8).