This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Sulfate results
MS0610015 , Piney Woods Country Life SCH
3 samples have been analysed for Sulfate at Piney Woods Country Life SCH.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every Sulfate result
All 3 samples analysed for this analyte are listed below, newest first. No date range is applied.
3 Sulfate results from the 3 samples listed here: 2 detected, 1 not detected. Those samples also carried 39 results for other analytes, which are on the full results page.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| 27.4 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 6, 2008, sampling point WL002 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| 8.21 mg/l , sample collected Oct 20, 2003, sampling point TF102 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| Not detected below 2.5 mg/l Minimum Reporting Level , sample collected Oct 20, 2003, sampling point TF103 | Sulfate 1055 EPA method 300.0 | Not recorded |
-
- Collected
- Nov 6, 2008
- Sampling point
- WL002 Well W002
- Sample type
- Routine
- Lab sample
- 081107-001PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 27.4 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Oct 20, 2003
- Sampling point
- TF102 Treatment Plant T102
- Sample type
- Routine
- Lab sample
- 031021-014IN
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 8.21 mg/l
-
- Collected
- Oct 20, 2003
- Sampling point
- TF103 Treatment Plant T103
- Sample type
- Routine
- Lab sample
- 031021-013IN
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- Not detected below 2.5 mg/l Minimum Reporting Level
Routine (3).