Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Sulfate results

MS0610041 , Acl Water Association #2

5 samples have been analysed for Sulfate at Acl Water Association #2.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Sulfate result

All 5 samples analysed for this analyte are listed below, newest first. No date range is applied.

5 Sulfate results from the 5 samples listed here: 5 detected, 0 not detected. Those samples also carried 73 results for other analytes, which are on the full results page.

Sulfate results for Acl Water Association #2, from the 5 samples analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Jul 23, 2010
Sampling point
WL002 Well W002
Sample type
Routine
Lab sample
100726-003PC
Laboratory
MSDH Lab
26.525 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jul 23, 2010, sampling point WL002 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Jul 23, 2010
Sampling point
WL003 Well W003
Sample type
Routine
Lab sample
100726-002PC
Laboratory
MSDH Lab
25.306 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jul 23, 2010, sampling point WL003 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Jul 7, 2010
Sampling point
WL004
Sample type
Routine
Lab sample
100709-001PC
Laboratory
MSDH Lab
26.88 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jul 7, 2010, sampling point WL004 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Oct 20, 2003
Sampling point
TF103 Treatment Plant T103
Sample type
Routine
Lab sample
031021-067IN
Laboratory
MSDH Lab
25.5 mg/l , sample collected Oct 20, 2003, sampling point TF103 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Oct 20, 2003
Sampling point
TF102 Treatment Plant T102
Sample type
Routine
Lab sample
031021-064IN
Laboratory
MSDH Lab
25.5 mg/l , sample collected Oct 20, 2003, sampling point TF102 Sulfate 1055 EPA method 300.0 Not recorded

Routine (5).