This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Chemical and radiological sample results
MS0610044 , City of Flowood - Noranco
38 of the 72 analytes this system has been tested for have been detected at least once, across 311 samples on record.
The other 34 were tested for and never found. An analyte is counted here if any result on record measured it, so this covers the whole history and not the samples listed below.
Across all 311 samples on record, detections range from October 22, 2003 to June 9, 2026. These figures cover the whole record.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
What has been detected, ever
Every analyte measured above its reporting level at any point in this system’s record, most often detected first. This is not limited to the samples listed below.
| Analyte | Kind | Detected in | First detected | Last detected |
|---|---|---|---|---|
| Copper, Free 1022 | Inorganic Chemical | 139 of 139 results | Sep 5, 2007 | Aug 20, 2025 |
| Lead 1030 | Inorganic Chemical | 64 of 139 results | Sep 5, 2007 | Aug 20, 2025 |
| Fluoride 1025 | Inorganic Chemical | 21 of 21 results | Oct 22, 2003 | Mar 25, 2025 |
| Barium 1010 | Inorganic Chemical | 20 of 20 results | Oct 22, 2003 | Mar 25, 2025 |
| TTHM 2950 | Organic Chemical | 19 of 22 results | Aug 9, 2004 | Jun 9, 2026 |
| Total Haloacetic Acids (Haa5) 2456 | Organic Chemical | 18 of 20 results | Jun 28, 2010 | Mar 3, 2026 |
| Bromodichloromethane 2943 | Organic Chemical | 15 of 17 results | Sep 13, 2007 | Jun 9, 2026 |
| Dibromochloromethane 2944 | Organic Chemical | 15 of 17 results | Sep 13, 2007 | Jun 9, 2026 |
| Chloroform 2941 | Organic Chemical | 14 of 17 results | Sep 13, 2007 | Jun 9, 2026 |
| Bromoform 2942 | Organic Chemical | 14 of 17 results | Sep 13, 2007 | Jun 9, 2026 |
| Dichloroacetic Acid 2451 | Organic Chemical | 14 of 15 results | Jun 28, 2010 | Mar 3, 2026 |
| Trichloroacetic Acid 2452 | Organic Chemical | 13 of 15 results | Jun 28, 2010 | Mar 3, 2026 |
| Dibromoacetic Acid 2454 | Organic Chemical | 13 of 15 results | Jun 28, 2010 | Mar 3, 2026 |
| Chromium 1020 | Inorganic Chemical | 13 of 20 results | Mar 22, 2004 | Mar 25, 2025 |
| Gross Alpha Particle Activity 4109 | Radionuclide | 8 of 8 results | Sep 19, 2011 | Apr 2, 2012 |
| Nickel 1036 | Inorganic Chemical | 7 of 20 results | Feb 3, 2010 | Mar 25, 2025 |
| Sodium 1052 | Inorganic Chemical | 5 of 5 results | Aug 28, 2009 | Dec 14, 2023 |
| Dichloromethane 2964 | Organic Chemical | 3 of 31 results | Aug 31, 2010 | Feb 22, 2011 |
| Sulfate 1055 | Inorganic Chemical | 3 of 3 results | Oct 22, 2003 | Aug 28, 2009 |
| Selenium 1045 | Inorganic Chemical | 3 of 20 results | Mar 22, 2004 | Mar 27, 2006 |
| Arsenic 1005 | Inorganic Chemical | 2 of 20 results | Mar 22, 2004 | Mar 25, 2025 |
| Monochloroacetic Acid 2450 | Organic Chemical | 2 of 15 results | Dec 8, 2016 | Dec 8, 2016 |
| Calcium 1016 | Inorganic Chemical | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| Chloride 1017 | Inorganic Chemical | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| Magnesium 1031 | Inorganic Chemical | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| Manganese 1032 | Inorganic Chemical | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| Potassium 1042 | Inorganic Chemical | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| Residue, Total, Filterable 1057 | Water Quality | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| Alkalinity, Caco3 Stability 1067 | Water Quality | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| Carbon Dioxide 1901 | Water Quality | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| Color 1905 | Water Quality | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| Hardness, Total (As Caco3) 1915 | Water Quality | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| Alkalinity, Total 1927 | Water Quality | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| Iron, Field Result FEFD | Inorganic Chemical | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| Calculated Sodium NACA | Water Quality | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| PH, Field Result PHFD | Water Quality | 1 of 1 result | Aug 28, 2009 | Aug 28, 2009 |
| Nitrite 1041 | Inorganic Chemical | 1 of 44 results | Aug 2, 2006 | Aug 2, 2006 |
| Mercury 1035 | Inorganic Chemical | 1 of 20 results | Mar 22, 2004 | Mar 22, 2004 |
No date range is applied: this list draws on every sample on record. Show the last two years only.
The most recent samples, result by result
The table below lists 241–250 of 311 samples, newest first — collected August 28, 2009 to August 3, 2010. The summary above covers all 311.
59 results from the 10 samples listed here: 39 detected, 20 not detected. Across the whole record it is 441 of 1,548. A sample is analysed for many analytes at once, so one sample appears on as many rows as it had results.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| 0.7238 mg/l , sample collected Aug 3, 2010, sampling point DS000 | Copper, Free 1022 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| 0.0013 mg/l , sample collected Aug 3, 2010, sampling point DS000 | Lead 1030 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
|
||
| 0.3636 mg/l , sample collected Aug 3, 2010, sampling point DS000 | Copper, Free 1022 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| 0.0013 mg/l , sample collected Aug 3, 2010, sampling point DS000 | Lead 1030 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
|
||
| 0.4841 mg/l , sample collected Aug 2, 2010, sampling point DS000 | Copper, Free 1022 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| 0.0005 mg/l , sample collected Aug 2, 2010, sampling point DS000 | Lead 1030 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
|
||
| Not detected below 0.002 mg/l Minimum Reporting Level , sample collected Jun 28, 2010, sampling point MRT000 | Monochloroacetic Acid 2450 EPA method 552.2 | Not recorded |
| 0.003 mg/l , sample collected Jun 28, 2010, sampling point MRT000 | Dichloroacetic Acid 2451 EPA method 552.2 | Not recorded |
| 0.003 mg/l , sample collected Jun 28, 2010, sampling point MRT000 | Trichloroacetic Acid 2452 EPA method 552.2 | Not recorded |
| Not detected below 0.001 mg/l Minimum Reporting Level , sample collected Jun 28, 2010, sampling point MRT000 | Monobromoacetic Acid 2453 EPA method 552.2 | Not recorded |
| 0.002 mg/l , sample collected Jun 28, 2010, sampling point MRT000 | Dibromoacetic Acid 2454 EPA method 552.2 | Not recorded |
| 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. , sample collected Jun 28, 2010, sampling point MRT000 | Total Haloacetic Acids (Haa5) 2456 | Jan 1, 2008 – Dec 31, 2010 |
|
||
| 6.02 ug/l , sample collected Jun 28, 2010, sampling point MRT000 | Chloroform 2941 EPA method 524.2 | Not recorded |
| 4.33 ug/l , sample collected Jun 28, 2010, sampling point MRT000 | Bromoform 2942 EPA method 524.2 | Not recorded |
| 9.68 ug/l , sample collected Jun 28, 2010, sampling point MRT000 | Bromodichloromethane 2943 EPA method 524.2 | Not recorded |
| 15 ug/l , sample collected Jun 28, 2010, sampling point MRT000 | Dibromochloromethane 2944 EPA method 524.2 | Not recorded |
| 35.03 ug/l , sample collected Jun 28, 2010, sampling point MRT000 | TTHM 2950 EPA method 524.2 | Jan 1, 2008 – Dec 31, 2010 |
|
||
| Not detected below 15 ug/l Minimum Reporting Level , sample collected Mar 10, 2010, sampling point TF101 | Cyanide 1024 EPA method QC10204001X | Jan 1, 2008 – Dec 31, 2010 |
|
||
| Not detected below 15 ug/l Minimum Reporting Level , sample collected Mar 10, 2010, sampling point TF102 | Cyanide 1024 EPA method QC10204001X | Jan 1, 2008 – Dec 31, 2010 |
|
||
| Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF102 | Arsenic 1005 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| 0.005269 mg/l , sample collected Feb 3, 2010, sampling point TF102 | Barium 1010 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF102 | Cadmium 1015 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| 0.001731 mg/l , sample collected Feb 3, 2010, sampling point TF102 | Chromium 1020 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| 0.254 mg/l , sample collected Feb 3, 2010, sampling point TF102 | Fluoride 1025 EPA method 380-75WE | Jan 1, 2008 – Dec 31, 2010 |
| Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF102 | Mercury 1035 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| 0.00088 mg/l , sample collected Feb 3, 2010, sampling point TF102 | Nickel 1036 EPA method 200.8 | Not recorded |
| Not detected below 0.0025 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF102 | Selenium 1045 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF102 | Antimony, Total 1074 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF102 | Beryllium, Total 1075 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF102 | Thallium, Total 1085 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
|
||
| Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF101 | Arsenic 1005 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| 0.005254 mg/l , sample collected Feb 3, 2010, sampling point TF101 | Barium 1010 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF101 | Cadmium 1015 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| 0.001681 mg/l , sample collected Feb 3, 2010, sampling point TF101 | Chromium 1020 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| 0.26 mg/l , sample collected Feb 3, 2010, sampling point TF101 | Fluoride 1025 EPA method 380-75WE | Jan 1, 2008 – Dec 31, 2010 |
| Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF101 | Mercury 1035 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF101 | Nickel 1036 EPA method 200.8 | Not recorded |
| Not detected below 0.0025 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF101 | Selenium 1045 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF101 | Antimony, Total 1074 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF101 | Beryllium, Total 1075 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
| Not detected below 0.0005 mg/l Minimum Reporting Level , sample collected Feb 3, 2010, sampling point TF101 | Thallium, Total 1085 EPA method 200.8 | Jan 1, 2008 – Dec 31, 2010 |
|
||
| 0.817 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Calcium 1016 EPA method 200.8 | Not recorded |
| 19.8 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Chloride 1017 EPA method 300.0 | Not recorded |
| 0.171 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Fluoride 1025 EPA method 380-75WE | Not recorded |
| Not detected below 0.1 mg/l Minimum Reporting Level , sample collected Aug 28, 2009, sampling point WL002 | Iron 1028 EPA method 200.8 | Not recorded |
| 0.206 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Magnesium 1031 EPA method 200.8 | Not recorded |
| 0.017 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Manganese 1032 EPA method 200.8 | Not recorded |
| 1.22 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Potassium 1042 EPA method 200.8 | Not recorded |
| 96.1 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Sodium 1052 EPA method 200.8 | Not recorded |
| 34.5 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Sulfate 1055 EPA method 300.0 | Not recorded |
| 265 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Residue, Total, Filterable 1057 EPA method CALCUL LAB | Not recorded |
| 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Alkalinity, Caco3 Stability 1067 EPA method 2320B | Not recorded |
| 10 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Carbon Dioxide 1901 EPA method CALCUL LAB | Not recorded |
| 15 units The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Color 1905 EPA method 2120B | Not recorded |
| 2.8 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Hardness, Total (As Caco3) 1915 EPA method CALCUL LAB | Not recorded |
| 187 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Alkalinity, Total 1927 EPA method 2320B | Not recorded |
| 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Iron, Field Result FEFD EPA method 3500AL-D | Not recorded |
| 113.6 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | Calculated Sodium NACA EPA method CALCUL LAB | Not recorded |
| 7.6 ph The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Aug 28, 2009, sampling point WL002 | PH, Field Result PHFD EPA method 3500AL-D | Not recorded |
-
- Collected
- Aug 3, 2010
- Sampling point
- DS000 Distribution
- Sample type
- Routine
- Lab sample
- 100803-043PB
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Copper, Free 1022 EPA method 200.8
- Result
- 0.7238 mg/l
-
Lead 1030 EPA method 200.8
- Result
- 0.0013 mg/l
-
- Collected
- Aug 3, 2010
- Sampling point
- DS000 Distribution
- Sample type
- Routine
- Lab sample
- 100803-042PB
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Copper, Free 1022 EPA method 200.8
- Result
- 0.3636 mg/l
-
Lead 1030 EPA method 200.8
- Result
- 0.0013 mg/l
-
- Collected
- Aug 2, 2010
- Sampling point
- DS000 Distribution
- Sample type
- Routine
- Lab sample
- 100803-041PB
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Copper, Free 1022 EPA method 200.8
- Result
- 0.4841 mg/l
-
Lead 1030 EPA method 200.8
- Result
- 0.0005 mg/l
-
- Collected
- Jun 28, 2010
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 100629-001HA
- Laboratory
- MSDH Lab
-
Monochloroacetic Acid 2450 EPA method 552.2
- Result
- Not detected below 0.002 mg/l Minimum Reporting Level
- Monitoring period
- Not recorded
-
Dichloroacetic Acid 2451 EPA method 552.2
- Result
- 0.003 mg/l
- Monitoring period
- Not recorded
-
Trichloroacetic Acid 2452 EPA method 552.2
- Result
- 0.003 mg/l
- Monitoring period
- Not recorded
-
Monobromoacetic Acid 2453 EPA method 552.2
- Result
- Not detected below 0.001 mg/l Minimum Reporting Level
- Monitoring period
- Not recorded
-
Dibromoacetic Acid 2454 EPA method 552.2
- Result
- 0.002 mg/l
- Monitoring period
- Not recorded
-
Total Haloacetic Acids (Haa5) 2456
- Result
- 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here.
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
- Collected
- Jun 28, 2010
- Sampling point
- MRT000 Max. Res. Time
- Sample type
- Routine
- Lab sample
- 100629-001TH
- Laboratory
- MSDH Lab
-
Chloroform 2941 EPA method 524.2
- Result
- 6.02 ug/l
- Monitoring period
- Not recorded
-
Bromoform 2942 EPA method 524.2
- Result
- 4.33 ug/l
- Monitoring period
- Not recorded
-
Bromodichloromethane 2943 EPA method 524.2
- Result
- 9.68 ug/l
- Monitoring period
- Not recorded
-
Dibromochloromethane 2944 EPA method 524.2
- Result
- 15 ug/l
- Monitoring period
- Not recorded
-
TTHM 2950 EPA method 524.2
- Result
- 35.03 ug/l
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
- Collected
- Mar 10, 2010
- Sampling point
- TF101 Treatment Plant T101
- Sample type
- Routine
- Lab sample
- 100311-006CN
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Cyanide 1024 EPA method QC10204001X
- Result
- Not detected below 15 ug/l Minimum Reporting Level
-
- Collected
- Mar 10, 2010
- Sampling point
- TF102 Treatment Plant T102
- Sample type
- Routine
- Lab sample
- 100311-004CN
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Cyanide 1024 EPA method QC10204001X
- Result
- Not detected below 15 ug/l Minimum Reporting Level
-
- Collected
- Feb 3, 2010
- Sampling point
- TF102 Treatment Plant T102
- Sample type
- Routine
- Lab sample
- 100204-008IN
- Laboratory
- MSDH Lab
-
Arsenic 1005 EPA method 200.8
- Result
- Not detected below 0.0005 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Barium 1010 EPA method 200.8
- Result
- 0.005269 mg/l
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Cadmium 1015 EPA method 200.8
- Result
- Not detected below 0.0005 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Chromium 1020 EPA method 200.8
- Result
- 0.001731 mg/l
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Fluoride 1025 EPA method 380-75WE
- Result
- 0.254 mg/l
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Mercury 1035 EPA method 200.8
- Result
- Not detected below 0.0005 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Nickel 1036 EPA method 200.8
- Result
- 0.00088 mg/l
- Monitoring period
- Not recorded
-
Selenium 1045 EPA method 200.8
- Result
- Not detected below 0.0025 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Antimony, Total 1074 EPA method 200.8
- Result
- Not detected below 0.0005 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Beryllium, Total 1075 EPA method 200.8
- Result
- Not detected below 0.0005 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Thallium, Total 1085 EPA method 200.8
- Result
- Not detected below 0.0005 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
- Collected
- Feb 3, 2010
- Sampling point
- TF101 Treatment Plant T101
- Sample type
- Routine
- Lab sample
- 100204-007IN
- Laboratory
- MSDH Lab
-
Arsenic 1005 EPA method 200.8
- Result
- Not detected below 0.0005 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Barium 1010 EPA method 200.8
- Result
- 0.005254 mg/l
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Cadmium 1015 EPA method 200.8
- Result
- Not detected below 0.0005 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Chromium 1020 EPA method 200.8
- Result
- 0.001681 mg/l
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Fluoride 1025 EPA method 380-75WE
- Result
- 0.26 mg/l
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Mercury 1035 EPA method 200.8
- Result
- Not detected below 0.0005 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Nickel 1036 EPA method 200.8
- Result
- Not detected below 0.0005 mg/l Minimum Reporting Level
- Monitoring period
- Not recorded
-
Selenium 1045 EPA method 200.8
- Result
- Not detected below 0.0025 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Antimony, Total 1074 EPA method 200.8
- Result
- Not detected below 0.0005 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Beryllium, Total 1075 EPA method 200.8
- Result
- Not detected below 0.0005 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
Thallium, Total 1085 EPA method 200.8
- Result
- Not detected below 0.0005 mg/l Minimum Reporting Level
- Monitoring period
- Jan 1, 2008 – Dec 31, 2010
-
- Collected
- Aug 28, 2009
- Sampling point
- WL002 Well W002
- Sample type
- Routine
- Lab sample
- 090831-005PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Calcium 1016 EPA method 200.8
- Result
- 0.817 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Chloride 1017 EPA method 300.0
- Result
- 19.8 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Fluoride 1025 EPA method 380-75WE
- Result
- 0.171 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Iron 1028 EPA method 200.8
- Result
- Not detected below 0.1 mg/l Minimum Reporting Level
-
Magnesium 1031 EPA method 200.8
- Result
- 0.206 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Manganese 1032 EPA method 200.8
- Result
- 0.017 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Potassium 1042 EPA method 200.8
- Result
- 1.22 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Sodium 1052 EPA method 200.8
- Result
- 96.1 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Sulfate 1055 EPA method 300.0
- Result
- 34.5 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Residue, Total, Filterable 1057 EPA method CALCUL LAB
- Result
- 265 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Alkalinity, Caco3 Stability 1067 EPA method 2320B
- Result
- 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Carbon Dioxide 1901 EPA method CALCUL LAB
- Result
- 10 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Color 1905 EPA method 2120B
- Result
- 15 units The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Hardness, Total (As Caco3) 1915 EPA method CALCUL LAB
- Result
- 2.8 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Alkalinity, Total 1927 EPA method 2320B
- Result
- 187 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Iron, Field Result FEFD EPA method 3500AL-D
- Result
- 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Calculated Sodium NACA EPA method CALCUL LAB
- Result
- 113.6 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
PH, Field Result PHFD EPA method 3500AL-D
- Result
- 7.6 ph The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
Routine (10).