This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Chemical and radiological sample results
MS0620005 , Homestead Water Association
35 of the 73 analytes this system has been tested for have been detected at least once, across 163 samples on record.
The other 38 were tested for and never found. An analyte is counted here if any result on record measured it, so this covers the whole history and not the samples listed below.
Across all 163 samples on record, detections range from November 3, 2003 to September 4, 2025. These figures cover the whole record.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
What has been detected, ever
Every analyte measured above its reporting level at any point in this system’s record, most often detected first. This is not limited to the samples listed below.
| Analyte | Kind | Detected in | First detected | Last detected |
|---|---|---|---|---|
| Copper, Free 1022 | Inorganic Chemical | 62 of 62 results | Sep 22, 2008 | Jul 25, 2023 |
| Lead 1030 | Inorganic Chemical | 54 of 62 results | Sep 22, 2008 | Jul 25, 2023 |
| TTHM 2950 | Organic Chemical | 17 of 19 results | Aug 9, 2004 | Sep 4, 2025 |
| Total Haloacetic Acids (Haa5) 2456 | Organic Chemical | 14 of 19 results | Jul 7, 2010 | Dec 3, 2024 |
| Chloroform 2941 | Organic Chemical | 12 of 14 results | Jul 7, 2010 | Sep 4, 2025 |
| Barium 1010 | Inorganic Chemical | 11 of 11 results | Nov 3, 2003 | Apr 8, 2025 |
| Trichloroacetic Acid 2452 | Organic Chemical | 10 of 14 results | Jul 7, 2010 | Sep 4, 2025 |
| Bromodichloromethane 2943 | Organic Chemical | 10 of 14 results | Jul 7, 2010 | Sep 4, 2025 |
| Nickel 1036 | Inorganic Chemical | 9 of 11 results | Nov 3, 2003 | Apr 8, 2025 |
| Dibromochloromethane 2944 | Organic Chemical | 9 of 14 results | Jul 7, 2010 | Dec 3, 2024 |
| Dichloroacetic Acid 2451 | Organic Chemical | 8 of 14 results | Jul 7, 2010 | Dec 3, 2024 |
| Chromium 1020 | Inorganic Chemical | 6 of 11 results | Nov 3, 2003 | May 7, 2019 |
| Fluoride 1025 | Inorganic Chemical | 5 of 12 results | Nov 12, 2010 | Apr 8, 2025 |
| Sodium 1052 | Inorganic Chemical | 4 of 4 results | Nov 12, 2010 | Dec 4, 2023 |
| Sulfate 1055 | Inorganic Chemical | 3 of 3 results | Nov 3, 2003 | Nov 12, 2010 |
| Dibromoacetic Acid 2454 | Organic Chemical | 2 of 14 results | Sep 5, 2013 | Aug 12, 2024 |
| Calcium 1016 | Inorganic Chemical | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| Chloride 1017 | Inorganic Chemical | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| Iron 1028 | Inorganic Chemical | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| Magnesium 1031 | Inorganic Chemical | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| Manganese 1032 | Inorganic Chemical | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| Potassium 1042 | Inorganic Chemical | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| Residue, Total, Filterable 1057 | Water Quality | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| Alkalinity, Caco3 Stability 1067 | Water Quality | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| Carbon Dioxide 1901 | Water Quality | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| Hardness, Total (As Caco3) 1915 | Water Quality | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| Alkalinity, Total 1927 | Water Quality | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| Iron, Field Result FEFD | Inorganic Chemical | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| Calculated Sodium NACA | Water Quality | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| PH, Field Result PHFD | Water Quality | 2 of 2 results | Nov 12, 2010 | Nov 12, 2010 |
| Monobromoacetic Acid 2453 | Organic Chemical | 1 of 14 results | Oct 13, 2020 | Oct 13, 2020 |
| Color 1905 | Water Quality | 1 of 1 result | Nov 12, 2010 | Nov 12, 2010 |
| Selenium 1045 | Inorganic Chemical | 1 of 11 results | Mar 27, 2006 | Mar 27, 2006 |
| Dichloromethane 2964 | Organic Chemical | 1 of 9 results | Aug 30, 2004 | Aug 30, 2004 |
| Cadmium 1015 | Inorganic Chemical | 1 of 11 results | Nov 3, 2003 | Nov 3, 2003 |
No date range is applied: this list draws on every sample on record. Show the last two years only.
The most recent samples, result by result
The table below lists 111–120 of 163 samples, newest first — collected November 12, 2010 to August 31, 2011. The summary above covers all 163.
37 results from the 10 samples listed here: 34 detected, 3 not detected. Across the whole record it is 269 of 740. A sample is analysed for many analytes at once, so one sample appears on as many rows as it had results.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| 0.3575 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Copper, Free 1022 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
| 0.0211 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Lead 1030 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
|
||
| 0.1233 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Copper, Free 1022 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
| 0.0011 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Lead 1030 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
|
||
| 0.1828 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Copper, Free 1022 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
| 0.0054 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Lead 1030 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
|
||
| 0.4543 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Copper, Free 1022 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
| 0.0017 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Lead 1030 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
|
||
| 0.5562 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Copper, Free 1022 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
| 0.0022 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Lead 1030 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
|
||
| 0.8013 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Copper, Free 1022 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
| 0.0012 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Lead 1030 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
|
||
| 0.2796 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Copper, Free 1022 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
| 0.0021 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Lead 1030 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
|
||
| 0.5581 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Copper, Free 1022 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
| 0.0007 mg/l , sample collected Aug 31, 2011, sampling point DS000 | Lead 1030 EPA method 200.8 | Jan 1, 2009 – Dec 31, 2011 |
|
||
| Not detected below 0.1 mg/l Minimum Reporting Level , sample collected Mar 30, 2011, sampling point TF080 | Nitrate-Nitrite 1038 EPA method 353.2 | Jan 1, 2011 – Dec 31, 2011 |
| Not detected below 0.08 mg/l Minimum Reporting Level , sample collected Mar 30, 2011, sampling point TF080 | Nitrate 1040 EPA method 353.2 | Jan 1, 2011 – Dec 31, 2011 |
| Not detected below 0.02 mg/l Minimum Reporting Level , sample collected Mar 30, 2011, sampling point TF080 | Nitrite 1041 EPA method 353.2 | Jan 1, 2011 – Dec 31, 2011 |
|
||
| 10.6 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Calcium 1016 EPA method 200.8 | Not recorded |
| 4.277 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Chloride 1017 EPA method 300.0 | Not recorded |
| 0.064 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Fluoride 1025 EPA method 380-75WE | Not recorded |
| 0.161 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Iron 1028 EPA method 200.8 | Not recorded |
| 1.83 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Magnesium 1031 EPA method 200.8 | Not recorded |
| 0.023 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Manganese 1032 EPA method 200.8 | Not recorded |
| 2.7 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Potassium 1042 EPA method 200.8 | Not recorded |
| 58.4 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Sodium 1052 EPA method 200.8 | Not recorded |
| 12.751 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Sulfate 1055 EPA method 300.0 | Not recorded |
| 173 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Residue, Total, Filterable 1057 EPA method CALCUL LAB | Not recorded |
| 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Alkalinity, Caco3 Stability 1067 EPA method 2320B | Not recorded |
| 38 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Carbon Dioxide 1901 EPA method CALCUL LAB | Not recorded |
| 20 units The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Color 1905 EPA method 2120B | Not recorded |
| 33.9 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Hardness, Total (As Caco3) 1915 EPA method CALCUL LAB | Not recorded |
| 138 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Alkalinity, Total 1927 EPA method 2320B | Not recorded |
| 0.11 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Iron, Field Result FEFD EPA method 3500AL-D | Not recorded |
| 55 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | Calculated Sodium NACA EPA method CALCUL LAB | Not recorded |
| 6.9 ph The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 12, 2010, sampling point WL001 | PH, Field Result PHFD EPA method 3500AL-D | Not recorded |
-
- Collected
- Aug 31, 2011
- Sampling point
- DS000 Distribution
- Sample type
- Routine
- Lab sample
- 110901-109PB
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2009 – Dec 31, 2011
-
Copper, Free 1022 EPA method 200.8
- Result
- 0.3575 mg/l
-
Lead 1030 EPA method 200.8
- Result
- 0.0211 mg/l
-
- Collected
- Aug 31, 2011
- Sampling point
- DS000 Distribution
- Sample type
- Routine
- Lab sample
- 110901-108PB
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2009 – Dec 31, 2011
-
Copper, Free 1022 EPA method 200.8
- Result
- 0.1233 mg/l
-
Lead 1030 EPA method 200.8
- Result
- 0.0011 mg/l
-
- Collected
- Aug 31, 2011
- Sampling point
- DS000 Distribution
- Sample type
- Routine
- Lab sample
- 110901-107PB
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2009 – Dec 31, 2011
-
Copper, Free 1022 EPA method 200.8
- Result
- 0.1828 mg/l
-
Lead 1030 EPA method 200.8
- Result
- 0.0054 mg/l
-
- Collected
- Aug 31, 2011
- Sampling point
- DS000 Distribution
- Sample type
- Routine
- Lab sample
- 110901-030PB
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2009 – Dec 31, 2011
-
Copper, Free 1022 EPA method 200.8
- Result
- 0.4543 mg/l
-
Lead 1030 EPA method 200.8
- Result
- 0.0017 mg/l
-
- Collected
- Aug 31, 2011
- Sampling point
- DS000 Distribution
- Sample type
- Routine
- Lab sample
- 110901-029PB
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2009 – Dec 31, 2011
-
Copper, Free 1022 EPA method 200.8
- Result
- 0.5562 mg/l
-
Lead 1030 EPA method 200.8
- Result
- 0.0022 mg/l
-
- Collected
- Aug 31, 2011
- Sampling point
- DS000 Distribution
- Sample type
- Routine
- Lab sample
- 110901-031PB
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2009 – Dec 31, 2011
-
Copper, Free 1022 EPA method 200.8
- Result
- 0.8013 mg/l
-
Lead 1030 EPA method 200.8
- Result
- 0.0012 mg/l
-
- Collected
- Aug 31, 2011
- Sampling point
- DS000 Distribution
- Sample type
- Routine
- Lab sample
- 110901-028PB
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2009 – Dec 31, 2011
-
Copper, Free 1022 EPA method 200.8
- Result
- 0.2796 mg/l
-
Lead 1030 EPA method 200.8
- Result
- 0.0021 mg/l
-
- Collected
- Aug 31, 2011
- Sampling point
- DS000 Distribution
- Sample type
- Routine
- Lab sample
- 110901-027PB
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2009 – Dec 31, 2011
-
Copper, Free 1022 EPA method 200.8
- Result
- 0.5581 mg/l
-
Lead 1030 EPA method 200.8
- Result
- 0.0007 mg/l
-
- Collected
- Mar 30, 2011
- Sampling point
- TF080 Treatment Plant T080
- Sample type
- Routine
- Lab sample
- 110331-034NI
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2011 – Dec 31, 2011
-
Nitrate-Nitrite 1038 EPA method 353.2
- Result
- Not detected below 0.1 mg/l Minimum Reporting Level
-
Nitrate 1040 EPA method 353.2
- Result
- Not detected below 0.08 mg/l Minimum Reporting Level
-
Nitrite 1041 EPA method 353.2
- Result
- Not detected below 0.02 mg/l Minimum Reporting Level
-
- Collected
- Nov 12, 2010
- Sampling point
- WL001 Well W001
- Sample type
- Routine
- Lab sample
- 101116-003PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Calcium 1016 EPA method 200.8
- Result
- 10.6 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Chloride 1017 EPA method 300.0
- Result
- 4.277 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Fluoride 1025 EPA method 380-75WE
- Result
- 0.064 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Iron 1028 EPA method 200.8
- Result
- 0.161 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Magnesium 1031 EPA method 200.8
- Result
- 1.83 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Manganese 1032 EPA method 200.8
- Result
- 0.023 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Potassium 1042 EPA method 200.8
- Result
- 2.7 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Sodium 1052 EPA method 200.8
- Result
- 58.4 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Sulfate 1055 EPA method 300.0
- Result
- 12.751 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Residue, Total, Filterable 1057 EPA method CALCUL LAB
- Result
- 173 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Alkalinity, Caco3 Stability 1067 EPA method 2320B
- Result
- 0 mg/l This result is recorded as a detection, and the figure the agency wrote — "0" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Carbon Dioxide 1901 EPA method CALCUL LAB
- Result
- 38 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Color 1905 EPA method 2120B
- Result
- 20 units The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Hardness, Total (As Caco3) 1915 EPA method CALCUL LAB
- Result
- 33.9 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Alkalinity, Total 1927 EPA method 2320B
- Result
- 138 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Iron, Field Result FEFD EPA method 3500AL-D
- Result
- 0.11 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
Calculated Sodium NACA EPA method CALCUL LAB
- Result
- 55 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
PH, Field Result PHFD EPA method 3500AL-D
- Result
- 6.9 ph The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
Routine (10).