This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Sulfate results
MS0640004 , Harrisville W/A
4 samples have been analysed for Sulfate at Harrisville W/A.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every Sulfate result
All 4 samples analysed for this analyte are listed below, newest first. No date range is applied.
4 Sulfate results from the 4 samples listed here: 4 detected, 0 not detected. Those samples also carried 51 results for other analytes, which are on the full results page.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| 39.9 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Nov 30, 2009, sampling point WL006 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| 57.1 mg/l , sample collected Oct 22, 2003, sampling point TF104 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| 57.9 mg/l , sample collected Oct 22, 2003, sampling point TF103 | Sulfate 1055 EPA method 300.0 | Not recorded |
|
||
| 18 mg/l , sample collected Oct 22, 2003, sampling point TF105 | Sulfate 1055 EPA method 300.0 | Not recorded |
-
- Collected
- Nov 30, 2009
- Sampling point
- WL006
- Sample type
- Routine
- Lab sample
- 091204-001PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 39.9 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Oct 22, 2003
- Sampling point
- TF104 Treatment Plant T104
- Sample type
- Routine
- Lab sample
- 031023-072IN
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 57.1 mg/l
-
- Collected
- Oct 22, 2003
- Sampling point
- TF103 Treatment Plant T103
- Sample type
- Routine
- Lab sample
- 031023-071IN
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 57.9 mg/l
-
- Collected
- Oct 22, 2003
- Sampling point
- TF105 Treatment Plant T105
- Sample type
- Routine
- Lab sample
- 031023-070IN
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Sulfate 1055 EPA method 300.0
- Result
- 18 mg/l
Routine (4).