Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Sulfate results

MS0650006 , Pineville Water Association #1

6 samples have been analysed for Sulfate at Pineville Water Association #1.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Sulfate result

All 6 samples analysed for this analyte are listed below, newest first. No date range is applied.

6 Sulfate results from the 6 samples listed here: 6 detected, 0 not detected. Those samples also carried 78 results for other analytes, which are on the full results page.

Sulfate results for Pineville Water Association #1, from the 6 samples analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
May 27, 2010
Sampling point
WL002 Well W002
Sample type
Routine
Lab sample
100528-004PC
Laboratory
MSDH Lab
12.34 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected May 27, 2010, sampling point WL002 Sulfate 1055 EPA method 300.0 Not recorded
Collected
May 27, 2010
Sampling point
WL001 Well W001
Sample type
Routine
Lab sample
100528-003PC
Laboratory
MSDH Lab
12.06 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected May 27, 2010, sampling point WL001 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Mar 29, 2004
Sampling point
TF101 Treatment Plant T101
Sample type
Routine
Lab sample
040330-066IN
Laboratory
MSDH Lab
11.9 mg/l , sample collected Mar 29, 2004, sampling point TF101 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Mar 29, 2004
Sampling point
TF102 Treatment Plant T102
Sample type
Routine
Lab sample
040330-065IN
Laboratory
MSDH Lab
12.7 mg/l , sample collected Mar 29, 2004, sampling point TF102 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Oct 27, 2003
Sampling point
TF102 Treatment Plant T102
Sample type
Routine
Lab sample
031028-099IN
Laboratory
MSDH Lab
12.3 mg/l , sample collected Oct 27, 2003, sampling point TF102 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Oct 27, 2003
Sampling point
TF101 Treatment Plant T101
Sample type
Routine
Lab sample
031028-066IN
Laboratory
MSDH Lab
11.7 mg/l , sample collected Oct 27, 2003, sampling point TF101 Sulfate 1055 EPA method 300.0 Not recorded

Routine (6).