Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Fluoride results

MS0650008 , City of Raleigh

33 samples have been analysed for Fluoride at City of Raleigh.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Fluoride result

The table below lists 11–20 of 33 samples, newest first — collected June 4, 2009 to December 14, 2016.

10 Fluoride results from the 10 samples listed here: 10 detected, 0 not detected. Those samples also carried 114 results for other analytes, which are on the full results page.

Fluoride results for City of Raleigh, from 11 to 20 of 33 samples shown analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Dec 14, 2016 12:05
Sampling point
TF101 Treatment Plant T101
Sample type
Routine
Lab sample
161215-087IN
Laboratory
MSDH Lab
0.159 mg/l , sample collected Dec 14, 2016 12:05, sampling point TF101 Fluoride 1025 EPA method 300.0 Jan 1, 2014 – Dec 31, 2016
Collected
Dec 14, 2016 12:25
Sampling point
TF102 Treatment Plant T102
Sample type
Routine
Lab sample
161215-086IN
Laboratory
MSDH Lab
0.163 mg/l , sample collected Dec 14, 2016 12:25, sampling point TF102 Fluoride 1025 EPA method 300.0 Jan 1, 2014 – Dec 31, 2016
Collected
May 22, 2013 01:35
Sampling point
TF103 Treatment Plant T103
Sample type
Routine
Lab sample
130523-019IN
Laboratory
MSDH Lab
0.164 mg/l , sample collected May 22, 2013 01:35, sampling point TF103 Fluoride 1025 EPA method 300.0 Jan 1, 2011 – Dec 31, 2013
Collected
May 22, 2013 01:20
Sampling point
TF102 Treatment Plant T102
Sample type
Routine
Lab sample
130523-018IN
Laboratory
MSDH Lab
0.166 mg/l , sample collected May 22, 2013 01:20, sampling point TF102 Fluoride 1025 EPA method 300.0 Jan 1, 2011 – Dec 31, 2013
Collected
May 22, 2013 01:05
Sampling point
TF101 Treatment Plant T101
Sample type
Routine
Lab sample
130523-017IN
Laboratory
MSDH Lab
0.159 mg/l , sample collected May 22, 2013 01:05, sampling point TF101 Fluoride 1025 EPA method 300.0 Jan 1, 2011 – Dec 31, 2013
Collected
Feb 10, 2010
Sampling point
TF103 Treatment Plant T103
Sample type
Routine
Lab sample
100211-030IN
Laboratory
MSDH Lab
0.149 mg/l , sample collected Feb 10, 2010, sampling point TF103 Fluoride 1025 EPA method 380-75WE Jan 1, 2008 – Dec 31, 2010
Collected
Feb 10, 2010
Sampling point
TF101 Treatment Plant T101
Sample type
Routine
Lab sample
100211-029IN
Laboratory
MSDH Lab
0.114 mg/l , sample collected Feb 10, 2010, sampling point TF101 Fluoride 1025 EPA method 380-75WE Jan 1, 2008 – Dec 31, 2010
Collected
Feb 10, 2010
Sampling point
TF102 Treatment Plant T102
Sample type
Routine
Lab sample
100211-021IN
Laboratory
MSDH Lab
0.147 mg/l , sample collected Feb 10, 2010, sampling point TF102 Fluoride 1025 EPA method 380-75WE Jan 1, 2008 – Dec 31, 2010
Collected
Jun 4, 2009
Sampling point
WL001 Well W001
Sample type
Routine
Lab sample
090605-006PC
Laboratory
MSDH Lab
0.138 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 4, 2009, sampling point WL001 Fluoride 1025 EPA method 380-75WE Not recorded
Collected
Jun 4, 2009
Sampling point
WL002 Well W002
Sample type
Routine
Lab sample
090605-003PC
Laboratory
MSDH Lab
0.119 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 4, 2009, sampling point WL002 Fluoride 1025 EPA method 380-75WE Not recorded

Routine (10).