This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Fluoride results
MS0720024 , Tunica County Utility District
103 samples have been analysed for Fluoride at Tunica County Utility District.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every Fluoride result
The table below lists 21–30 of 103 samples, newest first — collected December 14, 2016 to September 11, 2018.
10 Fluoride results from the 10 samples listed here: 9 detected, 1 not detected. Those samples also carried 142 results for other analytes, which are on the full results page.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| Not detected below 0.1 mg/l Minimum Reporting Level , sample collected Sep 11, 2018 01:50, sampling point TF110 | Fluoride 1025 EPA method 300.0 | Jan 1, 2017 – Dec 31, 2019 |
|
||
| 0.19 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 01:50, sampling point WL015 | Fluoride 1025 EPA method 380-75WE | Not recorded |
|
||
| 0.193 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 01:15, sampling point WL014 | Fluoride 1025 EPA method 380-75WE | Not recorded |
|
||
| 0.115 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 01:30, sampling point WL013 | Fluoride 1025 EPA method 380-75WE | Not recorded |
|
||
| 0.079 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 02:10, sampling point WL010 | Fluoride 1025 EPA method 380-75WE | Not recorded |
|
||
| 0.131 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 11:53, sampling point WL007 | Fluoride 1025 EPA method 380-75WE | Not recorded |
|
||
| 0.097 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 10:30, sampling point WL003 | Fluoride 1025 EPA method 380-75WE | Not recorded |
|
||
| 0.102 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 10:22, sampling point WL002 | Fluoride 1025 EPA method 380-75WE | Not recorded |
|
||
| 0.12 mg/l , sample collected Dec 14, 2016 01:30, sampling point TF110 | Fluoride 1025 EPA method 300.0 | Jan 1, 2014 – Dec 31, 2016 |
|
||
| 0.128 mg/l , sample collected Dec 14, 2016 11:30, sampling point TF101 | Fluoride 1025 EPA method 300.0 | Jan 1, 2014 – Dec 31, 2016 |
-
- Collected
- Sep 11, 2018 01:50
- Sampling point
- TF110 Treatment Plant T110
- Sample type
- Routine
- Lab sample
- 180912-021IN
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2017 – Dec 31, 2019
-
Fluoride 1025 EPA method 300.0
- Result
- Not detected below 0.1 mg/l Minimum Reporting Level
-
- Collected
- Jun 1, 2018 01:50
- Sampling point
- WL015
- Sample type
- Routine
- Lab sample
- 180622-021PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Fluoride 1025 EPA method 380-75WE
- Result
- 0.19 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jun 1, 2018 01:15
- Sampling point
- WL014
- Sample type
- Routine
- Lab sample
- 180622-020PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Fluoride 1025 EPA method 380-75WE
- Result
- 0.193 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jun 1, 2018 01:30
- Sampling point
- WL013
- Sample type
- Routine
- Lab sample
- 180622-019PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Fluoride 1025 EPA method 380-75WE
- Result
- 0.115 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jun 1, 2018 02:10
- Sampling point
- WL010 Well W010
- Sample type
- Routine
- Lab sample
- 180622-018PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Fluoride 1025 EPA method 380-75WE
- Result
- 0.079 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jun 1, 2018 11:53
- Sampling point
- WL007 Well W007
- Sample type
- Routine
- Lab sample
- 180622-017PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Fluoride 1025 EPA method 380-75WE
- Result
- 0.131 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jun 1, 2018 10:30
- Sampling point
- WL003 Grand #1
- Sample type
- Routine
- Lab sample
- 180622-016PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Fluoride 1025 EPA method 380-75WE
- Result
- 0.097 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jun 1, 2018 10:22
- Sampling point
- WL002 Well W002
- Sample type
- Routine
- Lab sample
- 180622-015PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Fluoride 1025 EPA method 380-75WE
- Result
- 0.102 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Dec 14, 2016 01:30
- Sampling point
- TF110 Treatment Plant T110
- Sample type
- Routine
- Lab sample
- 161215-008IN
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2014 – Dec 31, 2016
-
Fluoride 1025 EPA method 300.0
- Result
- 0.12 mg/l
-
- Collected
- Dec 14, 2016 11:30
- Sampling point
- TF101 Treatment Plant T101
- Sample type
- Routine
- Lab sample
- 161215-007IN
- Laboratory
- MSDH Lab
- Monitoring period
- Jan 1, 2014 – Dec 31, 2016
-
Fluoride 1025 EPA method 300.0
- Result
- 0.128 mg/l
Routine (10).