This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Manganese results
MS0720024 , Tunica County Utility District
7 samples have been analysed for Manganese at Tunica County Utility District.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every Manganese result
All 7 samples analysed for this analyte are listed below, newest first. No date range is applied.
7 Manganese results from the 7 samples listed here: 7 detected, 0 not detected. Those samples also carried 112 results for other analytes, which are on the full results page.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| 0.0027 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 01:50, sampling point WL015 | Manganese 1032 EPA method 200.8 | Not recorded |
|
||
| 0.0004 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 01:15, sampling point WL014 | Manganese 1032 EPA method 200.8 | Not recorded |
|
||
| 0.0046 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 01:30, sampling point WL013 | Manganese 1032 EPA method 200.8 | Not recorded |
|
||
| 0.0002 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 02:10, sampling point WL010 | Manganese 1032 EPA method 200.8 | Not recorded |
|
||
| 0.0036 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 11:53, sampling point WL007 | Manganese 1032 EPA method 200.8 | Not recorded |
|
||
| 0.0085 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 10:30, sampling point WL003 | Manganese 1032 EPA method 200.8 | Not recorded |
|
||
| 0.0023 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 1, 2018 10:22, sampling point WL002 | Manganese 1032 EPA method 200.8 | Not recorded |
-
- Collected
- Jun 1, 2018 01:50
- Sampling point
- WL015
- Sample type
- Routine
- Lab sample
- 180622-021PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Manganese 1032 EPA method 200.8
- Result
- 0.0027 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jun 1, 2018 01:15
- Sampling point
- WL014
- Sample type
- Routine
- Lab sample
- 180622-020PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Manganese 1032 EPA method 200.8
- Result
- 0.0004 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jun 1, 2018 01:30
- Sampling point
- WL013
- Sample type
- Routine
- Lab sample
- 180622-019PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Manganese 1032 EPA method 200.8
- Result
- 0.0046 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jun 1, 2018 02:10
- Sampling point
- WL010 Well W010
- Sample type
- Routine
- Lab sample
- 180622-018PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Manganese 1032 EPA method 200.8
- Result
- 0.0002 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jun 1, 2018 11:53
- Sampling point
- WL007 Well W007
- Sample type
- Routine
- Lab sample
- 180622-017PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Manganese 1032 EPA method 200.8
- Result
- 0.0036 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jun 1, 2018 10:30
- Sampling point
- WL003 Grand #1
- Sample type
- Routine
- Lab sample
- 180622-016PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Manganese 1032 EPA method 200.8
- Result
- 0.0085 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Jun 1, 2018 10:22
- Sampling point
- WL002 Well W002
- Sample type
- Routine
- Lab sample
- 180622-015PC
- Laboratory
- MSDH Lab
- Monitoring period
- Not recorded
-
Manganese 1032 EPA method 200.8
- Result
- 0.0023 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
Routine (7).