This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.
Radium-226 results
MS0740076 , Magees Creek W/A-North
21 samples have been analysed for Radium-226 at Magees Creek W/A-North.
This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.
What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.
No date range is applied: this list draws on every sample on record. Show the last two years only.
Every Radium-226 result
The table below lists 11–20 of 21 samples, newest first — collected September 9, 2009 to May 21, 2012.
10 Radium-226 results from the 10 samples listed here: 6 detected, 4 not detected. Those samples also carried 44 results for other analytes, which are on the full results page.
Units in this table
Radium-226 is recorded on this page in ug/l, mg/l and pci/l.
| Result | Analyte | Monitoring period |
|---|---|---|
|
||
| Not detected below 0.367 pci/l Minimum Reporting Level , sample collected May 21, 2012 14:00, sampling point TF080 | Radium-226 4020 EPA method 903.1 | Apr 1, 2012 – Jun 30, 2012 |
|
||
| Not detected below 0.203 pci/l Minimum Reporting Level , sample collected May 21, 2012 15:30, sampling point TF082 | Radium-226 4020 EPA method 903.1 | Apr 1, 2012 – Jun 30, 2012 |
|
||
| 0.4 pci/l , sample collected Mar 12, 2012 10:20, sampling point TF083 | Radium-226 4020 EPA method 903.1 | Jan 1, 2012 – Mar 31, 2012 |
|
||
| Not detected below 0.367 pci/l Minimum Reporting Level , sample collected Mar 12, 2012 09:45, sampling point TF080 | Radium-226 4020 EPA method 903.1 | Jan 1, 2012 – Mar 31, 2012 |
|
||
| Not detected below 0.203 pci/l Minimum Reporting Level , sample collected Mar 12, 2012 12:20, sampling point TF082 | Radium-226 4020 EPA method 903.1 | Jan 1, 2012 – Mar 31, 2012 |
|
||
| 0.133 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 10, 2010, sampling point TF082 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 0.15 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 10, 2010, sampling point TF081 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 0.224 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Mar 10, 2010, sampling point TF080 | Radium-226 4020 EPA method 903 | Jan 1, 2010 – Mar 31, 2010 |
|
||
| 0.229 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Sep 9, 2009, sampling point TF080 | Radium-226 4020 EPA method 903 | Jul 1, 2009 – Sep 30, 2009 |
|
||
| 0.249 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Sep 9, 2009 07:40, sampling point TF081 | Radium-226 4020 EPA method 903 | Jul 1, 2009 – Sep 30, 2009 |
-
- Collected
- May 21, 2012 14:00
- Sampling point
- TF080 Treatment Plant T080
- Sample type
- Routine
- Lab sample
- 120522-028
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Apr 1, 2012 – Jun 30, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- Not detected below 0.367 pci/l Minimum Reporting Level
-
- Collected
- May 21, 2012 15:30
- Sampling point
- TF082 Treatment Plant T082
- Sample type
- Routine
- Lab sample
- 120522-094
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Apr 1, 2012 – Jun 30, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- Not detected below 0.203 pci/l Minimum Reporting Level
-
- Collected
- Mar 12, 2012 10:20
- Sampling point
- TF083 Treatment Facility TF083
- Sample type
- Routine
- Lab sample
- 120313-019
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Jan 1, 2012 – Mar 31, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- 0.4 pci/l
-
- Collected
- Mar 12, 2012 09:45
- Sampling point
- TF080 Treatment Plant T080
- Sample type
- Routine
- Lab sample
- 120313-017
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Jan 1, 2012 – Mar 31, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- Not detected below 0.367 pci/l Minimum Reporting Level
-
- Collected
- Mar 12, 2012 12:20
- Sampling point
- TF082 Treatment Plant T082
- Sample type
- Routine
- Lab sample
- 120313-018
- Laboratory
- Radiation Safety Engineering
- Monitoring period
- Jan 1, 2012 – Mar 31, 2012
-
Radium-226 4020 EPA method 903.1
- Result
- Not detected below 0.203 pci/l Minimum Reporting Level
-
- Collected
- Mar 10, 2010
- Sampling point
- TF082 Treatment Plant T082
- Sample type
- Routine
- Lab sample
- 00447-003
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.133 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Mar 10, 2010
- Sampling point
- TF081 Treatment Plant T081
- Sample type
- Routine
- Lab sample
- 00447-002
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.15 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Mar 10, 2010
- Sampling point
- TF080 Treatment Plant T080
- Sample type
- Routine
- Lab sample
- 00447-001
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jan 1, 2010 – Mar 31, 2010
-
Radium-226 4020 EPA method 903
- Result
- 0.224 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Sep 9, 2009
- Sampling point
- TF080 Treatment Plant T080
- Sample type
- Routine
- Lab sample
- 02397-003
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jul 1, 2009 – Sep 30, 2009
-
Radium-226 4020 EPA method 903
- Result
- 0.229 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
-
- Collected
- Sep 9, 2009 07:40
- Sampling point
- TF081 Treatment Plant T081
- Sample type
- Routine
- Lab sample
- 02397-002
- Laboratory
- Laboratory, Ars
- Monitoring period
- Jul 1, 2009 – Sep 30, 2009
-
Radium-226 4020 EPA method 903
- Result
- 0.249 pci/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType.
Routine (10).