Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Sulfate results

MS0750002 , Culkin Water Dist

11 samples have been analysed for Sulfate at Culkin Water Dist.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Sulfate result

The table below lists 1–10 of 11 samples, newest first — collected July 23, 2002 to June 12, 2017.

10 Sulfate results from the 10 samples listed here: 10 detected, 0 not detected. Those samples also carried 145 results for other analytes, which are on the full results page.

Sulfate results for Culkin Water Dist, from 1 to 10 of 11 samples shown analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Jun 12, 2017
Sampling point
WL003 Well W003
Sample type
Routine
Lab sample
170613-003PC
Laboratory
MSDH Lab
7.776 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 12, 2017, sampling point WL003 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Jun 12, 2017
Sampling point
WL002 Well W002
Sample type
Routine
Lab sample
170613-002PC
Laboratory
MSDH Lab
32.87 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 12, 2017, sampling point WL002 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Jun 12, 2017
Sampling point
WL001 Well W001
Sample type
Routine
Lab sample
170613-001PC
Laboratory
MSDH Lab
28.134 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 12, 2017, sampling point WL001 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Jun 16, 2010
Sampling point
WL002 Well W002
Sample type
Routine
Lab sample
100617-007PC
Laboratory
MSDH Lab
33.76 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 16, 2010, sampling point WL002 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Jun 16, 2010
Sampling point
WL001 Well W001
Sample type
Routine
Lab sample
100617-006PC
Laboratory
MSDH Lab
29.02 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 16, 2010, sampling point WL001 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Jun 16, 2010
Sampling point
DS000 Distribution
Sample type
Routine
Lab sample
100617-001PC
Laboratory
MSDH Lab
32.28 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 16, 2010, sampling point DS000 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Apr 5, 2004
Sampling point
TF080 Treatment Plant T080
Sample type
Routine
Lab sample
040406-041IN
Laboratory
MSDH Lab
34.8 mg/l , sample collected Apr 5, 2004, sampling point TF080 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Jul 23, 2002
Sampling point
TF080 Treatment Plant T080
Sample type
Routine
Lab sample
020724-025IN
Laboratory
MSDH Lab
28.7 mg/l , sample collected Jul 23, 2002, sampling point TF080 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Jul 23, 2002
Sampling point
CC093 Master Meter M093
Sample type
Routine
Lab sample
020724-024IN
Laboratory
MSDH Lab
6.93 mg/l , sample collected Jul 23, 2002, sampling point CC093 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Jul 23, 2002
Sampling point
CC092 Master Meter M092
Sample type
Routine
Lab sample
020724-023IN
Laboratory
MSDH Lab
7.09 mg/l , sample collected Jul 23, 2002, sampling point CC092 Sulfate 1055 EPA method 300.0 Not recorded

Routine (10).