Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Sulfate results

MS0750005 , Hilldale Water District

15 samples have been analysed for Sulfate at Hilldale Water District.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Sulfate result

The table below lists 11–15 of 15 samples, newest first — collected October 29, 2003 to April 25, 2014.

5 Sulfate results from the 5 samples listed here: 5 detected, 0 not detected. Those samples also carried 72 results for other analytes, which are on the full results page.

Sulfate results for Hilldale Water District, from 11 to 15 of 15 samples shown analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Apr 25, 2014
Sampling point
WL005 Well W005
Sample type
Routine
Lab sample
140508-002PC
Laboratory
MSDH Lab
8.053 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Apr 25, 2014, sampling point WL005 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Apr 15, 2014
Sampling point
WL001 Well W001
Sample type
Routine
Lab sample
140508-001PC
Laboratory
MSDH Lab
4.559 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Apr 15, 2014, sampling point WL001 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Apr 6, 2009
Sampling point
WL008
Sample type
Routine
Lab sample
090407-003PC
Laboratory
MSDH Lab
20.1 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Apr 6, 2009, sampling point WL008 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Apr 5, 2004
Sampling point
TF080 Treatment Plant T080
Sample type
Routine
Lab sample
040406-016IN
Laboratory
MSDH Lab
4.38 mg/l , sample collected Apr 5, 2004, sampling point TF080 Sulfate 1055 EPA method 300.0 Not recorded
Collected
Oct 29, 2003
Sampling point
TF080 Treatment Plant T080
Sample type
Routine
Lab sample
031030-023IN
Laboratory
MSDH Lab
3.23 mg/l , sample collected Oct 29, 2003, sampling point TF080 Sulfate 1055 EPA method 300.0 Not recorded

Routine (5).