Lead and copper

MS0760007 , Town of Metcalfe

Every monitoring period on record is listed here. This page applies no date range. The same list limited to the last two years.

Lead and copper 90th-percentile sample summaries for Town of Metcalfe, 24 summaries, every one on record. The agency records no date of receipt for any of them.
Analyte	Monitoring period	Samples	90th percentile	Facility	Data quality
Copper	Jan 1, 2022 – Dec 31, 2024	13	0.225 mg/l	DS000	Accepted
Lead	Jan 1, 2022 – Dec 31, 2024	13	0.0006 mg/l	DS000	Accepted
Copper	Jan 1, 2021 – Dec 31, 2023	10	0.143 mg/l	DS000	Accepted
Lead	Jan 1, 2021 – Dec 31, 2023	10	0.0015 mg/l	DS000	Accepted
Copper	Jan 1, 2018 – Dec 31, 2020	7	0.5743 mg/l	DS000	Accepted
Lead	Jan 1, 2018 – Dec 31, 2020	7	0.0013 mg/l	DS000	Accepted
Copper	Jan 1, 2015 – Dec 31, 2017	11	0.6788 mg/l	DS000	Accepted
Lead	Jan 1, 2015 – Dec 31, 2017	11	0.0011 mg/l	DS000	Accepted
Copper	Jan 1, 2012 – Dec 31, 2014	12	0.158 mg/l	DS000	Accepted
Lead	Jan 1, 2012 – Dec 31, 2014	12	0.001 mg/l	DS000	Accepted
Copper	Jan 1, 2009 – Dec 31, 2011	10	0.1211 mg/l	DS000	Accepted
Lead	Jan 1, 2009 – Dec 31, 2011	10	0.0011 mg/l	DS000	Accepted
Copper	Jan 1, 2006 – Dec 31, 2008	10	0.4838 mg/l	DS000	Accepted
Lead	Jan 1, 2006 – Dec 31, 2008	10	0.0038 mg/l	DS000	Accepted
Copper	Jan 1, 2000 – Dec 31, 2002	10	0.168 mg/l	DS000	Accepted
Lead	Jan 1, 2000 – Dec 31, 2002	10	0.002 mg/l	DS000	Accepted
Copper	Jan 1, 1996 – Dec 31, 1996	10	0.166 mg/l	DS000	Accepted
Lead	Jan 1, 1996 – Dec 31, 1996	10	0.005 mg/l	DS000	Accepted
Copper	Jan 1, 1995 – Dec 31, 1995	10	0.321 mg/l	DS000	Accepted
Lead	Jan 1, 1995 – Dec 31, 1995	10	0.002 mg/l	DS000	Accepted
Copper	Jan 1, 1994 – Jun 30, 1994	20	0.096 mg/l	DS000	Accepted
Lead	Jan 1, 1994 – Jun 30, 1994	20	0.009 mg/l	DS000	Accepted
Copper	Jul 1, 1993 – Dec 31, 1993	20	0.141 mg/l	DS000	Accepted
Lead	Jul 1, 1993 – Dec 31, 1993	20	0.006 mg/l	DS000	Accepted

No date of receipt is recorded for any of these summaries.

This system’s violations

What the 90th percentile is

The 90th percentile of all samples collected from the distribution system is the standard that the US Environmental Protection Agency has chosen for determining compliance with the Lead and Copper Action Level under the federal Lead and Copper Rule. The 90th percentile is determined by ranking all sample results from lowest to highest and finding a result that is 90% of the number of sample results from the top. For example, if there are 10 sample results, the 90th percentile would be the 9th sample result from the top.

From the help text published with these pages.