Treatment Facility TF080

Facility: TF080 N. E. MS. Regional W/S
Type: Treatment Plant (TP)
Status: Active (A) no date recorded

Where this facility is sampled

Active sampling points at Treatment Facility TF080.
Sampling point	Description	Type
TF080	Treatment Plant T080	Entry Point

This page shows active sampling points only and leaves out retired ones and the samples taken at them.

Analyte levels designated for this facility

Every level on record is listed, including levels that have been replaced. A row with a date under Effective to has been superseded; one reading Open has not.

Summarized field sample results for this facility — each monitoring period, and the level it was assessed against.

Analyte levels the agency has designated for this facility, 5 on record, including levels that have been superseded.
Analyte	Control level type	Level	Effective from	Effective to	Summary type
Turbidity 0100	Maximum	1 NTU	Jan 1, 2002	Open	CFE Maximum Turbidity
Turbidity 0100	95 Percent	0.3 NTU	Jan 1, 2002	Open	CFE 95% Turbidity
Chlorine 0999	Minimum	0.2 MG/L	Jun 30, 1993	Oct 31, 2004	Entry Point RDC
Chloramine 1006	Minimum	0.2 MG/L	Nov 1, 2004	Open	Entry Point RDC
Carbon, Total 2920	Minimum	1.0 RATIO	Jan 1, 2002	Open	None recorded

What a designated level is

Under the Lead and Copper Rule, primacy agencies periodically designate a minimum, maximum, or range of values for a given analyte and treatment plant or entry point to the distribution system. These are called either Water Quality Control Parameters (WQCP) or Maximum Permissible Limits, depending on why and what level was set.

From the help text published with these pages.