Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

TTHM results

MS0580006 , City of Pontotoc

20 samples have been analysed for TTHM at City of Pontotoc.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every TTHM result

The table below lists 11–20 of 20 samples, newest first — collected July 28, 2004 to August 14, 2023.

10 TTHM results from the 10 samples listed here: 6 detected, 4 not detected. Those samples also carried 24 results for other analytes, which are on the full results page.

Units in this table

TTHM is recorded on this page in ug/l and mg/l. 1 mg/l = 1,000 ug/l.

TTHM results for City of Pontotoc, from 11 to 20 of 20 samples shown analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
Aug 14, 2023 10:30
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
TH-230815-005
Laboratory
MSDH Lab
1.35 ug/l , sample collected Aug 14, 2023 10:30, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2023 – Dec 31, 2023
Collected
Jun 20, 2022 12:36
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
TH-220621-015
Laboratory
MSDH Lab
1.76 ug/l , sample collected Jun 20, 2022 12:36, sampling point MRT000 TTHM 2950 EPA method 524.2 Not recorded
Collected
Nov 1, 2021 08:26
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
TH-211102-001
Laboratory
MSDH Lab
3.4 ug/l , sample collected Nov 1, 2021 08:26, sampling point MRT000 TTHM 2950 EPA method 524.2 Not recorded
Collected
Sep 29, 2020 13:40
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
200930-013TH
Laboratory
MSDH Lab
17.3 ug/l , sample collected Sep 29, 2020 13:40, sampling point MRT000 TTHM 2950 Jan 1, 2020 – Dec 31, 2020
Collected
May 28, 2019 01:21
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
190529-004TH
Laboratory
MSDH Lab
Not detected below 4 ug/l Minimum Reporting Level , sample collected May 28, 2019 01:21, sampling point MRT000 TTHM 2950 Not recorded
Collected
Dec 13, 2016 08:12
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
161214-021TH
Laboratory
MSDH Lab
Not detected below 4 ug/l Minimum Reporting Level , sample collected Dec 13, 2016 08:12, sampling point MRT000 TTHM 2950 Jan 1, 2014 – Dec 31, 2016
Collected
Aug 26, 2013 02:16
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
130827-009TH
Laboratory
MSDH Lab
Not detected below 4 ug/l Minimum Reporting Level , sample collected Aug 26, 2013 02:16, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2011 – Dec 31, 2013
Collected
Jun 28, 2010
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
100629-011TH
Laboratory
MSDH Lab
0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Jun 28, 2010, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2008 – Dec 31, 2010
Collected
Sep 4, 2007
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
070905-021TH
Laboratory
MSDH Lab
0 This result is recorded as a detection, and the figure the agency wrote — "0.00" — is zero to the precision it was written to. Read the zero as "smaller than the written figure resolves", not as "none present". SDWIS holds a separate numeric concentration that Drinking Water Watch does not publish, so this endpoint does not carry it either; no more precise magnitude is available here. The agency recorded a value but no unit of measure for it. The unit is NOT inferable from the analyte: many analytes are reported in more than one unit — TTHM and HAA5 in both MG/L and UG/L — so there is no per-analyte default to fall back on. The number is published as it stands and must not be compared to a limit. The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected Sep 4, 2007, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2005 – Dec 31, 2007
Collected
Jul 28, 2004
Sampling point
MRT000 Max. Res. Time
Sample type
Routine
Lab sample
040729-004TH
Laboratory
MSDH Lab
Not detected below 1 ug/l Minimum Reporting Level , sample collected Jul 28, 2004, sampling point MRT000 TTHM 2950 EPA method 524.2 Jan 1, 2004 – Dec 31, 2004

Routine (10).