Skip to main content
Alpha

This is a rebuild of Drinking Water Watch and not yet the official record. Use the agency’s current Drinking Water Watch for anything you need to rely on.

Alkalinity, Caco3 Stability results

MS0650018 , Pineville Water Association #2

1 sample has been analysed for Alkalinity, Caco3 Stability at Pineville Water Association #2.

This is one analyte out of the system’s whole record. For what has ever been detected here, and when, see all chemical and radiological results; for everything the system is tested for, see the analyte list.

What counts as a non-detect is defined in the help: Less than Indicator. This system’s violations.

No date range is applied: this list draws on every sample on record. Show the last two years only.

Every Alkalinity, Caco3 Stability result

All 1 samples analysed for this analyte are listed below, newest first. No date range is applied.

1 Alkalinity, Caco3 Stability result from the 1 sample listed here: 1 detected, 0 not detected. Those samples also carried 17 results for other analytes, which are on the full results page.

Alkalinity, Caco3 Stability results for Pineville Water Association #2, from the 1 samples analysed for it, newest first. This view leaves out other analytes on the same samples. Not detected means the amount was below the level the laboratory can reliably report, which is given beside it.
Result Analyte Monitoring period
Collected
May 27, 2010
Sampling point
WL001 Well W001
Sample type
Routine
Lab sample
100528-006PC
Laboratory
MSDH Lab
3.5 mg/l The agency recorded which kind of limit this result was below, but stored 0.000000000 as the limit itself, which is not a level. The type is published and the value is null. What the limit was is not on record. Whether the result was a detection is a separate column: read resultType. , sample collected May 27, 2010, sampling point WL001 Alkalinity, Caco3 Stability 1067 EPA method 2320B Not recorded

Routine (1).